vga cat5 Articles - Page 1 - ArticleSnatch.com

Articles about vga cat5 (0-50 of 61)

  • The Essence Of Having Kvm Switches In Your Data Center
    By: PROXY | - As your company grows you realize that you need to process data faster so as to give your clients all the information they need in a timely fashion. This need often compels a company to obtain more computers and servers but which take up more of the company's available space and also take a toll on its present staff. All these complications should inform the management of the need to make more investments so as to be able to better manage the added infrastructure. A centralized system for managi ...
    Tags:

  • Shopping For A Rackmount Console "€" What Are The Qualities To Look For?
    By: PROXY | - The keyboard, video and mouse - KVM switch has had great success in helping to conserve space that could have otherwise been occupied by all the monitors, keyboards and mouse for all the computers or servers a firm may have. Continuous innovation has seen the development of the rackmount console which is basically a KVM switch with a keyboard, mouse and monitor, all in a single unit. It can also be viewed as a notebook attached to the KVM switch. This console not only helps to save you more spac ...
    Tags:

  • Monitor Switch: Space Saving Solution Allowing Sharing Of Display Devices
    By: Peter Pal Disuja | - A monitor switch enables multiple computers to share either one or multiple display devices with VGA ports. These devices may either be monitors or projectors. The numbers of displays which can be shared depend upon the number of ports which the switch has. It can share 2 4 or 8 displays as the device is available in 2, 4 or 8 port versions. Rackmount options are also available for some of the larger units. For more connections, one can use the video matrix switcher which is a combination of the ...
    Tags: , , ,

  • Audio Kvm Switch: Share A Single Set Of Peripheral Between Multiple Computers
    By: Peter Pal Disuja | - A single keyboard, video monitor and mouse can be connected to more than one computer using the KVM Switch. The number of computers which can be connected to s single set of peripherals depends upon the ports that the switch has. Available in 2, 4, 8 and 16 ports, these units can also be daisy chained together to control an even greater number of computers. Connections between the peripherals and the host computer can be secured using either CAT5 or VGA cables. Some models are also connected via ...
    Tags: , , ,

  • Video Matrix Switch: Display Information From Many Sources On One Display Unit Or Vice Versa
    By: jennifer luec | - Video from several different sources can be viewed on a several display devices using a Video Matrix Switch. Since a matrix like pattern of interconnection is created with many sources connected to many displays in any configuration, this device is referred to as a matrix switch. A single source can also be connected to all displays or all sources to a single display. The resultant signal clarity however is such that each display appears to be individually connected to the source as every output ...
    Tags: , ,



  • How Does Av Matrix Relays Audio And Video Signals Simultaneously From And To Multiple Devices
    By: jennifer luec | - Matrix switches which are capable of relaying audio and video from multiple sources to multiple devices are known as AV Matrix switches. These devices are the most demanded units in the category of matrix units as they can replay both audio and video signals. Available in sizes ranging from 2x2 form factors to 32x32, they can be single stand alone desktop units or rack mountable enterprises. For larger configurations, these units can also be cascaded or daisy chained. Supporting resolutions of 1 ...
    Tags: , , ,

  • Matrix Switcher: Creates Web Patterns Of Interconnections
    By: Peter Pal Disuja | - Video from multiple sources can be routed to multiple displays with the help of a Matrix Switcher. The name of this device is derived from the ability to connect any combination of inputs with any outputs or a single input with multiple outputs creating a web like pattern of interconnection. The switches range from 2x2 to 16x16 models and some variants can also be daisy chained for achieving a greater configuration. Available in various different models depending upon the type of video signals s ...
    Tags: , , ,

  • Cat5 Matrix Switch: Audio Video Inputs Routed From Multiple Sources To Multiple Displays
    By: jennifer luec | - A CAT5 Matrix Switch is used to route audio video inputs from multiple sources to multiple displays. Both video and audio can be routed to multiple monitors and speakers via category cables. Since multiple inputs can be connected to multiple outputs in any fashion, a web like pattern of interconnection possibilities is created. Available in sizes ranging from 8 in 8 out to 32 in and 16 out, these units can also be cascaded to achieve greater configurations. The key feature of this device is elim ...
    Tags: , ,

  • Component Matrix Switch Create Multiple Combinations Between Video Source And Display Units
    By: Elitha William | - A combination of video switch and a video splitter, the video matrix switcher is a device that allows multiple video and audio sources to be routed and switched between multiple video displays and speakers. Some or all videos from the sources can be routed to either some or all of the display devices. Since any combination of input can be connected any combination of output, the result is a matrix like pattern of interconnection possibilities, thereby giving the name to the switching device. Ava ...
    Tags: , , ,

  • Kvm Switch- Reduces Clutter And Saves Space Associated With Multiple Peripherals
    By: jennifer luec | - An abbreviation for keyboard, video and mouse, the KVM Switch, is a piece of hardware using which a user can control two or more computers with a single set of peripherals. Available in a variety of styles with different functionalities, these devices work on the simple plug and play principle. They do not require any additional software or device drivers for operation. Connections can be secured by using wither PS2 or VGA cables. Typically, 2 to 32 computers can be connected, but by cascading t ...
    Tags: , , , , , ,



  • Video Matrix Switch: Simplify Video Switching In Complex Work Environments
    By: jennifer luec | - A video matrix switch can simultaneously route video from many sources to many displays. The name is derived from the fact that this device creates a matrix like pattern of interconnection possibilities. Not only does it allow multiple sources to be connected with multiple displays but it also allows a single source to be connected with multiple outputs. This unit essentially combines the features of a video splitter and video switch into one. Devices such as LCDs, projectors, CRT monitors ca ...
    Tags: , , , , ,

  • All You Wanted To Know About Digital Audio Switch
    By: Mike J David | - Before taking the discussion to detail, it is very important to know what exactly is a Digital Audio Switcher and how does it functions. In simple statement, a audio switcher is exclusively designed to connect the two different digital audio sources to a common input audio receiver or amplifier. Ideally put, the digital audio switch, or the 6:1 HDMI SWITCH is a perfect addendum to those amazing digital home theater and hi-fi system, having multiple audio sources.

    When you have inte ...

    Tags: , ,

  • Vga Splitter: Vga Video Displayed Simultaneously On Multiple Screens
    By: Elitha William | - A VGA splitter enables VGA video to be displayed from one source to multiple devices. A normal configuration is 2, 4, 8 or 16 ports but in order to achieve a greater distribution up to 90 displays, one can daisy chain or cascade multiple units. Easy to install, the process is such that the unit is connected with a VGA cable from the computers graphic port to the input. Out of the multiple outputs, the primary connection is used for the main display while the rest are connected to the other di ...
    Tags: , , ,

  • Know How Of Dvi Extender Hdmi Extender Vga Extender
    By: Elitha William | - DVI (digital video interface) extender is a device which is used to transfer high resolution video signals to the DVI display devices located at remote sites. It can be directly connected to the computer system. Thus the signal transmission is possible through remote access also. The various types of dvi extenders transmit the signal either through a Cat5/6/e or through fiber optic. It consists of a transmitter part which is always connected to the computer and the receiver part which is always ...
    Tags: , , , ,

  • Equipping Your Mobile Phone And Computer
    By: Mark Wilson | - When you are using a computer or laptop, you are able to see the video signal on the monitor by using a VGA cable.These cables are also used to connect computers or laptops to projectors. The cables are also known as VGA extensions, Monitor cable, VGA video cable or computer cable. It is possible to separate a computer from the monitor over great distances. These cable come in sizes up to 100 feet long.





    For distances greater than100 feet it is advisable that yo ...

    Tags: , ,




  • Cat5 Video Matrix: Simultaneous Audio And Video Transmission Over Long Distances
    By: jennifer luec | - Multiple video and stereo audio sources can be relayed to multiple output devices with the help of cat5 matrix switch. Consisting of a local transmitter unit placed next to the source and a remote receiver placed next to the display, the connections between these two units are secured using standard UTP or STP Cat5e, Cat6 cables and distance of extension can be up to 1000 feet. Available in sizes ranging from 8x8 to 32x16, greater configurations up to 64 x 64 can be achieved by cascading these d ...
    Tags: , , , , ,

  • Kvm Switch: Control Multiple Computers Without Investing In Additional Peripherals
    By: jennifer luec | - A KVM Switch is used to control multiple computers using a single Keyboard, Monitor and mouse. In situations where multiple computers need to be controlled without multiple input devices, this switch comes in handy. Supporting most platforms such as SUN, IBM, HP, Dell, Windows Vista/2003/XP/2000, UNIX and MAC, they also help in proper utilization of space and result in better cable management. A typical KVM switch can connect from 2 to 32 computers, but by cascading these devices, an even greate ...
    Tags: , , ,

  • Vga Over Cat5: Redefines Vga Extension
    By: jennifer luec | - Long distance VGA video extension between source and display devices is made possible by using a VGA Extender. The device consists of two units, a local transmitting unit and a remote receiving unit, each of which are placed at a distance away from each other and connected with Cat5 cables. There are other forms of video extenders available in the market and the major difference among them lies in the type of signals they transmit as well as by the means in which the remote and local unit are co ...
    Tags: , , ,

  • Explore The Benefits Of Vga Splitters
    By: jennifer luec | - VGA (Video Graphic Array) splitter is a hardware device that is used to display the computers video signal that has VGA output to as many as 16 VGA monitors; there is also a provision of making a series of multiple VGA splitters so as to display the image on 90 or more display devices/monitors. The big advantage of these splitters is that the images are crystal clear since there is no loss of signal, also because the splitter has the ability to amplify the signal. When the splitter is used wi ...
    Tags: , , , , ,

  • Explore The World Of Usb Extension Devices
    By: jennifer luec | - The USB extender is a hardware device that permits you to make extensions from 1 to 4 USB peripheral devices. Using inexpensive Cat5 / Cat5e / Cat6 UTP cable, it could make extensions up to 150ft. The best part of this device is that it uses simple plug and play functionality and hence is easy to set up. The various applications that this device supports are Windows, Mac-OS, Linux and Sun and are extensively used in applications using Extron Annotator and remote touch screen displays; it also co ...
    Tags: , ,

  • Information And Types Of Kvm Switches
    By: jennifer luec | - KVM switch stands for a keyboard, video, mouse switch that allows the user to connect multiple computers to a single keyboard, video and mouse; it could also work in the reverse direction. These devices are widely used in controlling a pool of servers in data centers. Through these switches you could save equipment, time, space, money and power; they also support user terminals at both ends which actually allow local as well as remote access to all the computers or servers. There are various typ ...
    Tags: , , , ,

  • Usb Extenders: Defies Limits Imposed On Usb Extension
    By: jennifer luec | -
    USB extender permits the user to make extensions from 1 to 4 USB peripheral devices. Using inexpensive Cat5/Cat5e/Cat6 UTP cable, it could make extensions up to 150ft. The best part of this device is that it uses simple plug and play functionality and hence is easy to set up. The various applications that this device supports are Windows, Mac-OS, Linux and Sun and are extensively used in applications using Extron Annotator and remote touch screen displays; it also could be used for applic ...

    Tags: , , , , , ,

  • Vga Splitter: Splitting Vga Video While Retaining Quality Of Images
    By: jennifer luec | - VGA splitter stands for Video Graphic Array splitter which is a hardware device, that allows you to display computers video signal enabled with VGA output to as many as 16 VGA monitors. The biggest advantage of these splitters is that, it could be arranged into a series of multiple splitters so as to display the image on multiple monitors. When these splitters are used with inexpensive Cat5 / Cat5e / Cat6 cables, the VGA video signals could be extended up to 984ft. Even though the images are ...
    Tags: , , , ,

  • Vga Splitter: Splits Signals And Relays Them To Multiple Vga Devices
    By: jennifer luec | - VGA splitter (Video Graphic Array) is a hardware device that permits you to display your computers video signal with VGA output on as many as 16 VGA monitors. By cascading this device, it could be made into series of multiple VGA splitters so as to display the image on 90 or more monitors. There is no loss of signal and the images are crystal clear because the video splitter amplifies the signal. The protocols that video splitters follow are DDC, DDC2, and DDC2B. Using Cat5 / Cat5e / Cat6 cab ...
    Tags: , , , ,

  • Vga Extender: Extend Clear Vga Video Over A Long Distance
    By: jennifer luec | - An electronic device used to transmit VGA video over Cat5 / Cat5e / Cat6 UTP cables to long distances is the VGA Extender. It operates without hampering the resolution of the relayed signals. This piece of hardware lowers the overall cost of your system by increasing its lifetime via better media player protection. The greatest advantage being that you can put your expensive content PCs in a secure, temperature-controlled backroom where they can easily be accessed and maintained by service peopl ...
    Tags: , , , ,

  • Dvi Splitter: Connect Multiple Dvi Displays To A Single Dvi Source
    By: jennifer luec | - The DVI Splitter is a hardware device used for displaying the same image on multiple DVI monitors from a single DVI (Digital Visual Interface) source. Having compliance to HDCP, it supports the DDC2B protocol along with DDWG standards for DVI monitors. These devices are available in port sizes of 2, 4 and 8 and can also be cascaded thereby letting you to split and share your DVI video connection among larger number of DVI video displays. These video splitters are also available in a CAT5 version ...
    Tags: , , , , ,

  • Do You Need Information On The Cat5 Kvm Switch?
    By: Rudy Silva | - Most Cat5 KVMs use RJ-45 interface and Cat5 Cable to enable the Cat5 KVM to connect with other servers. The RJ-45 interface allows KVM multiple ports to integrate into one U surface to save space. Category 5 KVM is cost-effective and convenient to wire and extend the distance between Category 5 KVM and the personal computer.

    In order to make category 5 KVM functional, it needs the services of Cat5 KVM switches. With Cat5 KVM switches, multiple computers can be controlled with one si ...

    Tags: , , , ,

  • Audio Video Splitter: Synchronize A/v Signals From One Source To Multiple Devices
    By: Eris Dicosta | - The audio video splitter can simultaneously transmit audio as well as video signals from a host computer to eight or more screens and speakers. There are a few models available to choose from when trying split audio and video. The basic AV splitter which uses standard VGA and 3.5mm audio cables, and the Cat5 audio video splitter extender which utilizes UTP/STP cabling to transmit the audio and video signals over long distances. The VGA Video and Audio Matrix is another variation which allows mul ...
    Tags: , ,

  • Cat5 Extender: Secure Way Of Remotely Accessing Computers Without Extra Expenditure On Hardware
    By: Eris Dicosta | - Users located beyond the distance limitations imposed by standard KVM cables can now rely on a CAT5 Extender to help them access their computers remotely. The innovative technology used by these extenders makes it easy to break the distance barriers as well as eliminating the clutter associated with bulky cables. By using a single Cat5/Cat6 cable, a user can transmit data and high-resolution video up to 1000 feet away. This device converts the keyboard, video and mouse signals locally and transm ...
    Tags: , ,

  • Usb Extension: Overcoming Connectivity And Distance Limitations Imposed By Usb Cables
    By: Eris Dicosta | - USB Extension devices allow extension of USB 1.1 and 2.0 devices beyond the 5 meter USB connection limit. With the help of these devices, the extension can range from 100 meters up to 10 km, depending upon the channel which is used for connection. Extenders can be connected using Cat5e cables, using wireless technology or over fiber. The latter uses fiber optic cables for transmission of signals whereas wireless technology works using radio transmission. Most common amongst the types of Extensio ...
    Tags: , , ,

  • Audio Extender: Stream Audio And Microphone Long Distances Over Cat5 Cable
    By: Eris Dicosta | - An Audio Extender is used to extend stereo audio and microphone up to 300 meters away from the source system over Cat5e cables. Since Cat5 cables are used to make the long distance connection, it reduces the cost as well as eliminates the need for multiple cables for audio and microphone. These extension devices consist of a transmitter, receiver and a power supply. While the former unit is connected to the local audio/mic source, the latter is connected to remote speakers.

    The aud ...

    Tags: , ,

  • Vga Cable: Enables High Resolution Video Extension
    By: Eris Dicosta | - VGA Cables are extension cables which transmit video signals between PC"'""s or laptops and displays or projectors. They are also referred to as VGA extension, Computer Cable, Monitor cable, and VGA video cable. These cables extend the amount of distance you can separate a PC from a display, and typically can allow users to view the display up to 100 feet away from the computer. For distances over 100ft and up to 1000 ft, VGA video extender over Cat5 and UTP VGA Video Splitter Extender are re ...
    Tags: , , , ,

  • Revolutionizing The Way Hdtv Is Viewed Simultaneously On Multiple Devices
    By: Eris Dicosta | - Using many cables to connect and switch between HDMI set-top boxes, DVD players, and gaming systems to display on multiple HDTV displays was proving to be a cumbersome process for users.

    In the past, transmitting video and audio to various HDTVs from a single source required plugging and unplugging cables from each display device which proved to be a cumbersome process. With the introduction of HDMI Splitters, the method of connecting input and output devices was simplified. A HDMI ...

    Tags: , ,

  • Cat5 Kvm Switch: Reduces Cable Clutter And Extends Distance Between The Computer And Peripherals
    By: jennifer luec | - A CAT5 KVM switch has replaced the bulky cables typically used to connect systems and uses Cat5 cabling for connecting the computers to the KVM switch. These switches allow a user to directly connect the switch to a keyboard, video display and mouse while giving the added benefit of longer distances and better cable management between all of the computer systems. With the help of these Cat5 KVM devices, a user can be at a distance of up to 40 meters away from a server. These units can also be ca ...
    Tags: , , ,

  • Kvm Extender: Low Cost Solution Lengthening Distance Of Use Between Peripherals And Computer
    By: jennifer luec | - Remote control of a computer or KVM peripherals is provided by the KVM Extender. A transmitter unit and the receiver unit are the key components of these devices. These two units connect the computer to the KVM peripherals via the Cat5/Cat5e/Cat6 cables and provide an affordable solution for remote access. External power is needed on the receiver end only and the transmitter draws power directly from the computer. A user gets the flexibility to place the peripherals wherever he wants and the com ...
    Tags: , , ,

  • Vga Splitter: Transmit The Same Vga Signal To Multiple Video Display Devices
    By: jennifer luec | - With the help of a VGA Splitter, one VGA signal can be simultaneously transmitted to many display devices. In order to obtain the output on 90 or more monitors, these splitters can be cascaded together to form a large hub. In order to extend these signals over larger distances, inexpensive Cat5/ Cat5e and Cat6 cables are used to connect the source and output devices. The splitters used for these long distance transmissions are called Cat5 UTP VGA Video splitters. While the VGA splitter is the mo ...
    Tags: , ,

  • Vga Extender: Transmits A Single Video Signal Over Cat5 Cable To Long Distances
    By: jennifer luec | - A VGA Extender transmits video signals between the video source and the display device. The signals can be extended over a range of 950 feet over Cat5/5e/6 cables eliminating the need to use bulky video cables. This extension device consists of two units local and remote which are connected to the computer and the display device respectively ensuring rapid delivery of signals. Also known as VGA boosters or video baluns, these devices have the ability to increase the signal strength and provide ...
    Tags: , ,

  • Video Splitter: A Device For Surveillance Applications To Display Video Signal On Multiple Displays
    By: jennifer luec | - With the help of a Video Splitter, a video signal from a single source can be distributed to multiple outputs at the same time without any loss in the signal quality. They amplify many types of video, including s-video television signals, RCA or BNC connections, VGA and DVI and send it to multiple monitors. They can be used to send signals from video cameras, computers, VCRs or cable boxes to many displays. The number of displays that it supports varies depending upon the model of the splitter. ...
    Tags: , ,

  • Vga Switch: An Essential Component For Viewing Video From Multiple Devices
    By: Eris Dicosta | - Using these units, multiple high resolution VGA video signals can be switched and displayed on a single display without ghosting of images. In fact, a VGA switch provides a resolution of up to 1920 x 1440 @ 60 Hz and a bandwidth of 250 MHz. The images presented are crisp and clear and appear as though they are directly connected to the source device. More than one switcher can be daisy chained to expand the number of computers that can be connected to each other. VGA Cables are used to connect t ...
    Tags: , , , ,

  • Kvm Extender: Powerful, Long Range Solution For Extension Of Kvm Peripherals
    By: Eris Dicosta | - KVM peripheral devices can be extended up to 1000 feet away from the computer with the help of a KVM extender. Various models transmit signals ranging from 330 ft up to 1000 ft away without any loss of signals. In addition to the long range remote connectivity, these extenders provide connections for local user KVM control right at the console. These extender units comprise of a transmitter and a receiver. While the former is connected to the computer with KVM cables, the latter is connected to ...
    Tags: , , ,

  • Vga Extender: Worthwhile For Transmitting High Quality Images Or Video Over Long Distances
    By: Eris Dicosta | - VGA video can be transmitted using Cat5/5e/6 cables from a computer to a display placed up to 950 feet away with the help of VGA extenders. These devices are sometimes called VGA Boosters, signal boosters or VGA baluns. These are used to increase the signal strength from a VGA port and allow it to be passed over a Cat5/5e/6 cable.

    While there are a variety of video extenders available on the market today, such as DVI extender, HDMI extender, kvm extender, Component extender, the VG ...

    Tags: , , ,

  • Vga Splitter: Transmit A Single Vga Image To Multiple Vga Display Devices
    By: Eris Dicosta | - VGA Splitter also referred to as Video splitter, distribution amplifier, VGA monitor splitter or screen splitter, can route a VGA signal to up to sixteen different display devices. These splitters are used to display the same image simultaneously on multiple monitors located throughout your facility.

    In addition to routing video remotely the video splitter also has the option to support local video. An advantage of using these devices is that there is no compromise of image quality ...

    Tags: , , ,

  • Video Extender: Economical Means Of Long Distance Video Transmission Over Cat5/cat6 Utp Cables
    By: Eris Dicosta | - Video Extender enables you to extend video between the source and the output devices over long distances. These devices use standard Cat5 / Cat5e / Cat6 UTP cables to send video between the local transmitting unit and the remote receiving unit. Since these Video Extenders use Cat5/Cat6 cables thus eliminating the need for long bulky VGA cables. These Cat5 Extender units transmit Video locally as well as remotely to one or multiple screens.

    Amongst the various types of video extende ...

    Tags: , , ,

  • Video Splitter: Replicates An Image From One Pc To Multiple Monitors
    By: Eris Dicosta | - Video Splitter also commonly called a distribution amplifier acts as a signal booster and splitter. It facilitates the display of one PC or alternative video source and replicates the same image on multiple monitors. These Video splitters come with a built-in signal booster that enhances video quality and delivers a crystal clear picture as if it is connected directly to the PC. We can find various types of video distribution amplifier products on the market today.

    The VGA splitter ...

    Tags: , , ,

  • Vga Switch: A Space-saving Solution For Monitoring Multiple Systems
    By: Eris Dicosta | - Video Graphics Array Switch or what is otherwise known better as a VGA Switch enables switching video from multiple video sources to one display device. It eliminates the need of redundant monitors & is an essential video component where limited operating space is available. Video switch allows multiple computers to share one monitor, projector or other video display with a VGA port. These units are compatible with PCs, MACs and SUNs with VGA video as well as various other VGA video sources such ...
    Tags: , , ,

[1][2

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.