The Energy Behind Renewable Energy 2

Renewable energy replaces conventional fuels in four distinct areas: power generation, hot water/ space heating, transport fuels, and rural (off-grid) energy services.

Power generation. Renewable energy provides 18 percent of total electricity generation worldwide. Renewable power generators are spread across many countries, and wind power alone already provides a significant share of electricity in some areas: for example, 14 percent in the U.S. state of Iowa, 40 percent in the northern German state of Schleswig-Holstein, and 20 percent in Denmark. Some countries get most of their power from renewables, including Iceland and Paraguay (100 percent), Norway (98 percent), Brazil (86 percent), Austria (62 percent), New Zealand (65 percent), and Sweden (54 percent).

Heating. Solar hot water makes an important contribution in many countries, most notably in China, which now has 70 percent of the global total (180 GWth). Most of these systems are installed on multi-family apartment buildings and meet a portion of the hot water needs of an estimated 50-60 million households in China. Worldwide, total installed solar water heating systems meet a portion of the water heating needs of over 70 million households. The use of biomass for heating continues to grow as well. In Sweden, national use of biomass energy has surpassed that of oil. Direct geothermal for heating is also growing rapidly.

Transport fuels. Renewable biofuels have contributed to a significant decline in oil consumption in the United States since 2006. The 93 billion liters of biofuels produced worldwide in 2009 displaced the equivalent of an estimated 68 billion liters of gasoline, equal to about 5 percent of world gasoline production.

Wind Turbines located outside of Palm Springs, California. Airflows can be used to run wind turbines. Modern wind turbines range from around 600 kW to 5 MW of rated power, although turbines with rated output of 1.5-3 MW have become the most common for commercial use; the power output of a turbine is a function of the cube of the wind speed, so as wind speed increases, power output increases dramatically. Areas where winds are stronger and more constant, such as offshore and high altitude sites, are preferred locations for wind farms. Typical capacity factors are 20-40%, with values at the upper end of the range in particularly favourable sites.

Globally, the long-term technical potential of wind energy is believed to be five times total current global energy production, or 40 times current electricity demand. This could require wind turbines to be installed over large areas, particularly in areas of higher wind resources. Offshore resources experience mean wind speeds of 90% greater than that of land, so offshore resources could contribute substantially more energy.