A circular retaining waved
Raschig ring consists of two laps of a flat elongated strip wire and walk a sine wave which includes a series of waves on the equidistant wavepath ring each wave that part of the shoulders bearing surfaces generally parallel work items placed on a tree or in a cylinder bore. The ring fits into a rectangular groove is formed on a tree or in a cylinder bore, the width of the groove being slightly higher the distance between two successive peaks and troughs.
In keeping
Raschig ring set axially at least one member working in a cylindrical bore, and the maintenance of the work item in a selected position said bore in maintaining a uniform pressure on said work, thecombination including: a universal model capable cylindrical bore receiving at least one work through rolling engagement, the bore including an annular groove having a substantially rectangular configuration with two groove walls flat cylindrical bore generally perpendicular Toth, radially inwardly opening groove in the radial inner bore said bore between opposite walls of the groove diameter of the groove, at least one work element placed inside said bore near the groove, saidgroove being located in said bore in a plane generally parallel to said work element, and a circular ring, elastic, compressible turbulent restraint to retain this element of work in the bore, the ring being adapted to fit in the bore, said ringbeing formed of at least two turns of a band elongated annular flat wire wound in a circle around a common edge of said band and having two free ends so as to allow relative movement of the strip between the towers, each of these windings adjacenteach other and generally parallel each other to form a circular ring having at least three waves multiturn who engage said work element and bore groove, these waves, including the crest and trough of successive portions spaced equidistant fromeach others on the periphery of the bore, these waves to define a continuous curve and significantly Sine said peaks and troughs of the shoulders.
Retaining
Raschig ring is widely used in many areas to keep Work Items on the two trees in the cylinder bores. When the retaining rings are used on cylindrical shafts to maintain a number of elements working together on this, it is desirablethat such rings to keep the specific elements in their jobs on the tree applying heavy pressure on the elements. The tree elements, however, can be manufactured with a tolerance, that is elements can be overcome theirspecified nominal longitudinal distance or slightly thereunder. In the first case where the elements are oversized tree, elements of the tree will encroach on the site retaining ring on the tree. In the second case where the shaftelements are too small, the ring restraint may are not against the elements and therefore the elements can travel along the stem.
raschig ring ceramic saddle
