Wireless routers are now immensely popular among the computer users. This piece of electronic device allows the user to access the Internet without any wire. Those who are tired of being tethered and experience the freedom of wireless Internet access, they can setup wireless router and be a part of wire free world. It is very easy to setup modern wireless routers. Explore this article and learn get step-by-step to setup wireless routers. However for
Internet and network support, you may consult an expert.
Before you start to setup the device, you need to choose a wireless router. It is always recommended to go for a dual band router, with 802.11n wireless networking standard. This ensures high data transfer speeds. Before buying the router, you may browse through the wireless router reviews on the Internet. It is also important to place the wireless router in a suitable location, so that it could render uniform wireless Internet access throughout your home.
Once the router is properly placed, you need to setup the wireless router. In order to perform this task, first you need to disconnect the Internet modem from the PC. Remove the modem cable that is connected to the back of your PC and insert it into the WAN port of the wireless router. Note that the modem will be directly connected with the Internet connection on one end while on the other end it will be connected with the wireless router. Internet access will be gained through a Wi-Fi connection. Next, you have to switch on the modem and connect it with Internet. The first step of wireless router installation is to connect the router.
Now you have to configure your wireless router. To perform this task, open up your default browser and type in the address that has been specified in the router manual for configuration. This address varies depending on the brand of the router. For instance, Linksys, Belkin and Netgear have different addresses for configuration.
After entering the address, press enter and you will get a log in screen. You need to enter a login name and password. You have to enter the default username and password that is recommended in the router manual. You will get various tabs and first you need to set up an administrator login name and password first. And then enable WAP2 encryption so that your network would be secure. Next, set up a new SSID name for your network. If you are done, save settings and close the window.
After disconnecting the PC to router connection establish the connection with the wireless router by using network setup wizard. However, minor details specific to a router brand might vary but the process is almost the same for all wireless routers.
