Quick Installation Guide Creator Engineering Conference Solutions

CREATOR 4 Series conference system quickly from the system upgrade from 3 series of meetings, in the end, what performance enhancing? This is the user, engineering companies and even our sales engineers are very concerned about:



1. Conference audio is good or bad depends largely on the reduction of sound effects.



Use a low-noise (SNR = 75dB), high sensitivity (negative 40dB) of the pickups (microphones core), the range of super-cardioid pickup without directly facing the core first speech will also achieve a good pick sound effect. Microphone pole head made from a carefully designed structure, the core microphone adjusted to best effect, but also a certain extent, ease the howling phenomenon. Also increased the two-color light ring human design (red to the floor, waiting to speak or apply for a green statement). Miles, five pole switch to the high density air core plugs, reliable unit firmly connected with the statement.



2. Statements made by the new performance unit:



Optimize microphone processing circuit, to solve the traditional shouted into the microphone distortion phenomenon occurs! Audio transmission processing, we use the differential transmission technology, to effectively suppress the transmission of noise interference and improve transmission distance (the effective transmission distance of 500 meters). The whole machine adopts energy-saving speech processing unit, the standby power consumption is only 0.6W, the peak power consumption is only 2.5W (2W have been built with a triumphant device). Machine uses low-noise, high-fidelity op amp chip processing circuit, frequency response is: 20Hz20kHz 1dB. Output signal to noise ratio to 85dB.



3. Host part: Careful circuit design, effectively inhibited the overload distortion. Compensation using online audio technology, to effectively address the traditional conference system, the more open floor unit, the smaller the output audio phenomenon. Host also integrates high-end sound processing chip, can adjust the touch of a button through panel also will discuss PC software can be adjusted. Download audio transmission technology with a difference. Machine's frequency response is: 20Hz ~ 20kHz 0.5dB. Output SNR: 88dB.



4. Overall 4 Series performance is very obvious, with the overall performance of the domestic and international first-line brand competing over looks, in May 2009 in Nanning with a line of domestic brands on the same stage PK, CREATOR4 series of meetings of the system to win the final product can be best illustrated.



Conference Systems FAQ: Engineering problems more meetings, human engineering problems caused by the accident called the project (equivalent to "medical"), to bring great passive project construction enterprises.



Typical questions: 1, single-cable design will extend the discussion to speak to connect too many units. There was a business conference system engineering project, 35 + 1 floor unit, the project site was an extension of only the laying of cables for all units and the host computer. This is the first not to conclude there is no problem.



2, single-cable design will be discussed to extend the connection unit is too small, resulting in increase in the budget. Typical in large systems or large systems applications, allocation of units of the group can not be reasonably lead; or as too cautious, conservative, the increase in the budget;



3, before and after the meeting when the anti-home cable installation, the system can not properly complete the connection. Need to re-wiring or the need to cut off both ends of the thread re-welding, which gave the implementation of the project to bring some passive.



Project completion can not be expected or not expected acceptance, payment will affect the project, severity, and even the credibility of the works and the company's normal business operations;



Engineering rework Typical scenario: a meeting system is usually installed with the meeting room renovation project at the same time, the meeting system debugging phase of the basic completion of the fitting room, conference table is usually from room to extend the meeting from the floor laying cables, extension cables, if the number of laying not enough to extend the cable would need to increase, this case involves the engineering rework and even the decoration simultaneously rework, resulting in great harm.



Damaged equipment Not common, but there are such problems.



Affect users This common, crashing frequently used in user needs, the project is still to be completed, needs overtime to speed up progress of the project. Engineering problems often occur at a time more terrible to deal with the case even when the direct impact on the user's intended use, to exert tremendous pressure on engineering business.



Engineering problem is how the meeting produced?



1, the engineering company did not provide proper instructions;



2, firms do not provide basic installation guide;



3, project engineering or construction companies do not pay attention to the guidance related projects;



4, engineering design or construction business blind construction;



5, vendor performance changes lead to differences in equipment installation;



Conference Systems solutions incident: