New York City Emergency Lights

New York City emergency lights could be used throughout the five boroughs.

In contrast to other towns, which depend upon the Universal Building Code (UBC) along with other federal polices, New York has created unique specifications for Emergency Lights. These dont negate the federal regulations, since neighborhood laws cant supersede federal one. Nevertheless, they add more stronger limitations than the federal ones include. Mount New York City emergency lights to insure occupant safety and maintain NYC developing code compliance.

The main difference between New York City Emergency Light requirements and those which are explained by other controlling agencies is that New York City requires a higher illumination level from emergency lights than other regulations do:

OSHA regulations call for that all egress routes be illuminated to an average of 1 foot-candle of illumination, measured at a height of 1 foot off the floor.

New York City regulations need that all egress routes be illuminated in their entirety to a minimum of 2 foot-candles of illumination, measured at the floor level.

Additional New York City Emergency Light Requirements

Additionally to this greater illumination level, New York City adds that the illumination of egress routes be planned and installed in such a manner to insure that if one bulb burns out, no component of the egress route will likely be in darkness. Although they do not spell out that the illumination level in such circumstances should meet the two foot-candles requirement, they do need that there be some illumination.

The easiest approach to insure that these requirements are met would be to use approved New York City Emergency Lights. Theses lights are various than other emergency lights in that they provide a higher level of illumination, to ensure that they are able to meet the greater illumination requirements. All emergency lights that are labeled New York City Emergency Lights have been presented to the New York City Creating Authority for inspection and approval.

New York City Emergency Light Voltages

Wet Location New York City Emergency Lights are waterproof and rated for outdoor use.

Due to this greater illumination requirement, you are much better off buying greater voltage emergency lights. Although most emergency lights as 6 VDC, you can find also 12 & 24 VDC units available. Just as a flashlight with more batteries produces a brighter light, so do emergency lights with higher voltages produce brighter light. This makes it easier to meet New York Citys requirements.

Greater voltage emergency lights also provide the advantage of being more easily adapted for remote lamp heads. Remote lamp heads allow the same emergency light unit to power an extra lamp head, which is located as much as a couple hundred feet away from the emergency lighting unit. This can accrue to an equipment purchase savings for your company, by not having to buy as many emergency lighting units. Greater voltage means less line voltage loss through your wiring.

New York City Emergency Light Placement

Placement of these lights is also important. In most applications, architects design the electrical plan for the developing to overlap the light cone of the exit lights, insuring that the loss of one bulb will not cause that component of the egress route to fall into darkness.

Since New Your City Emergency Lights are special lights, they are normally steel cased emergency lights and not thermoplastic. Whilst this eliminates many appealing designs, it does give you the advantage of being able to customize your emergency lights, such as with remote lamp heads. You can find a number of other options which are readily available steel cased emergency lights, which cannot be installed in thermoplastic ones.