Modular Buildings General Facts And Information

A modular building is a pre-manufactured or pre-assembled type of building or house having several sections, which is constructed beforehand and then brought to the intended site or area using a crane or truck. The modules are fabricated into a single building for residential purposes.

Modular buildings are not basically the same as a mobile home. The former is not supported by frames or axles when transported to the site but is set on a flat-bed truck, although there are certain modular dwellings that require a steel frame for it to be delivered to the area.

Uses of a Modular Building

There are various uses or purposes of a modular building. For one, it can be used either as a temporary or permanent type of residence to some families. Apart from being a residential dwelling, it can also be used for commercial purposes such as schools and classrooms, construction camps, civilian and military housing, and industrial uses.

In addition, modular buildings are useful facilities for churches, health care facilities, retail offices, and fast food outlets. In remote areas where a regular housing construction can be difficult, modular dwellings can make a great substitute.

Construction of Modular Buildings

Modular buildings are normally constructed inside a huge indoor construction site set on assembly lines. These assembly lines have tracks that allow the modules to be moved from one workstation to another during the start of the construction process.

The modules are basically one of the most important
components in its construction. These are fabricated within a span of one to three months but can be put up in as little as ten days. From the off-site facility, they are transported to the indoor construction area to be assembled together using a crane.

The process of assembling the modules can take several hours or days. A completely put up modular building resembles that of a typical residence, which is conventionally established.
Here is a quick step-by-step process in setting up the parts and components of a modular building:

-The bulk materials (walls, modules, ceiling, roof, sidings) are prepared inside the building site.

-After the modules are put up, the first to be attached to the floor are the walls.

-Then, the ceiling goes through a drywall process in a spray booth.

-The roof is then set in place before it is shingled.

-The sidings are next to be installed and some finishing touches are made.

-The modular building is now ready for delivery to the intended site.

Advantages

As compared to a conventional construction, modular buildings are generally favoured for the following reasons:

-The construction process is faster, allowing for a faster return of investment for most manufacturers.

-The indoor construction facility makes the process quicker and increases work efficiency regardless of weather conditions.

-Modular buildings can substitute conventional
constructions in remote areas.

-Manufacturers can take advantage of lower pricing on materials from suppliers.

-The construction process of modular buildings is more eco-friendly than that of a regular off-site construction.