Log Homes Diy: Log Home Staining - How To Do It Right

So, are you planning to "Do It Yourself"?

I can't blame you. If you are a crafty type of person, the idea of building your own home is really a powerful motivator. As with any endeavor, you will usually find tricks to the trade, and knowledge overcomes experimentation each and every time... Here are some tips for staning your log home as we knew that sooner or later you will need to re-stain your log home.

The key to any log home finish is keeping up the exsiting protocol of your log home manufacturer. Most finishes need some sort of clear coat or maintenance coat each and every 3 to 4 years. Be aware of some oil-based stains that have color in their maintenance coats. Each and every time you apply, it'll get darker. Following 2 or 3 times, it'll loose its original appearance and will turn out to be very dark.

Provide your log home a light bath each and every year. Eliminating any dust, dirt or tree sap which have accumulated on the logs will help preserve the finish. Apply Log Wash at a low pressure to soak for a bit. You might need to scrub with a soft brush for thicker soiled places, and rinse it out. You may use a power washer for this procedure, but stay back 10-20 feet to ensure that you're just misting it for rinsing purposes.

When preparing a new home to stain, sand all rough spots, splinters, and marks left from the construction procedure. A light bath is then suggested to get rid of the dirt and sawdust. You ought to usually apply a great high quality borate treatment prior to staining to stop log rot and maintain any wood-boring insects from entering the wood. Borate can only be put on to bare wood, so as soon as you've stained; it is really a misuse of time and cash to attempt to get it on your home.

When wrapping up a log home which has an existing finish, the old finish must be removed if it's peeling, breaking or has black color mildew thriving below it. Moisture is your enemy having a log home and also the less water and moisture applied the much better.

Don't power wash old finishes. It'll drive the water so deep into the wood fiber, that it'll never dry out correctly and might trigger black mold to grow below your new stain over time. Utilizing a power washer to try and strip finishes will work excellent on the dry, broken down stained places, but will drive the water into the wood.