Lag Screws: Simple Machines For Outstanding Projects

For the simple machines known as screws you can expect to have many different kinds you can choose from. One of these would be lag screws which are by definition- rods that have spiral threads. The heads of these would either be hexagon shaped or squared shaped. The main use of lag screws would be to hold objects and pieces of objects together. If you picture this simple machine in your head, it will be made out of metal and it can be rotated or driven into wood or another object with the use of pliers or a wrench.

In comparison to the normal hardware that you see around your home, lag screws would likely be a bit larger. That is why the tool used to loosen it or tighten it is a wrench. If you think about bolts, they would have almost the same purpose where the best strength in clamping force is needed. These special screws are used for projects like decking, wall foundations, garage doors and the like. Maybe you have a yard that you want to build a fence around. You also would like to have a gate in one section of the fence. You'll be using a lag screw to keep things in place.

With so many different kinds of screws, you might like to hear about the benefits of using them as opposed to the other types. As it was mentioned above, these simple machines have large square or hexagonal heads. Even with a huge amount of pressure used for tightening the screw, there is no problem with stripping the head. As for removing the lag screws from applications, the head again works to make it easy for removal. Besides different types and coatings, they can come in a variety of sizes and make.

The most common are chrome plated. This works well enough with preventing corrosion. Besides chrome, a galvanized finish can also be used to cover the screw up. You can be sure that the lag screw you use in your projects would withstand breaking or weakening. Using the best materials with a lag fastener, the project you made would survive for many, many years with just a little bit of maintenance. For wood applications, the best material would be pressure treated lumber. This would also be a good idea for mounting gates around your home.

Installing them isn't rocket science. You just have to align the pieces you want to fasten and hold them with a clamp. Drill the pilot holes for your screw and when you drive the appropriate sized lag screw in, it will do its work with bolding the materials securely together. At the end of the lag screw, don't forget to use cap it with the lag washer. You'll complete your project and you will have the security that it wouldn't fall to pieces with time or with pressure. Using simple machines like bolts and screws, you'll get a lot of work done and beautify your home successfully.