The main motivation people paint their interior walls is usually to brighten up the look of the room. A fresh paint job can provide new life in a dull space. To achieve a smooth finish you must first take time to prepare the walls appropriately. People like to try to cut corners to avoid wasting money and time, but doing this could make your work look dreadful and cost you a lot of cash..
Follow these simple guidelines for a smooth application:
The first step is to use a paint scraper to get rid of all the old chipped paint. Scrape as much of the old paint off that you can. Sand the chipped areas by using a piece of sandpaper wrapped around a sanding block. Make sure to smooth the edges as much as possible to ensure that it will not be noticeable under your new paint.
Wipe down the areas to be painted. Wash walls and woodwork to get rid of dust and grease from all of the surfaces. Grease would keep the paint from sticking to the surface properly, and dirt or dust will attach itself onto your newly painted wall. Wash with a mild soap and water solution and allow to air dry before prepping.
Tape off the parts you donot want painted like baseboards and mouldings. Cover lighting fixtures and wall sockets, and put plastic sheets over furniture to protect from drips. You may also need to put plastic or an old sheet down on to the carpet in the area you are painting. Paint rollers can sometimes slip and hit where you don't want it to.
Fill in any holes or cracks with filler and smooth out. Also fill in any holes left from where you scraped the old paint if there are any. If there is the least bit of an impression in the wall it can show through the paint as an uneven spot, so be certain you fill this as well. When you have filled in all of the spots, smooth the puttied area with a damp sponge and then allow it dry. When dry, sand the area with the sanding block to smooth out any edges that are left.
Choose a top quality brand of paint. You do not need to spend a fortune on a gallon of paint, but you must buy a high quality product. Call around to some local contractors in your area and ask them what brand of paint they Would suggest that you use. Once you have a name you can call or visit some home improvement stores and check and compare prices. This is often a very important step because if you choose a less expensive brand of paint it may not cover as well, this means using more than one coat, which also means more paint. Using a primer is an option, but usually is not required. A good brand of paint should cover in one coat. Sometimes you may need a further coat to give it a more polished look.
A final tip:
After your new paint has dried, check for any bubbled or uneven spots. If you see bubbles, lightly scrape the top, fill and retouch. You can always buy a small pot of the same colour paint for touch ups. If you are not really a do-it-yourself type, or you do not have the time for such a project you can hire a professional to do the job for you.
Interior and exterior painting is difficult work and by doing it yourself you may or may not pull off the results that youve been expecting. If you are planning to paint the exterior of your property then think about hiring company such as
Painter London first. There is a lot of arranging to do, so you really have to to plan it carefully, otherwise you will end up wasting a lot of paint.
