Insulative Coating | Liquid Masking | Protective Coating

Insulative Coating | Liquid Masking | Protective Coating

By:


Application is designed for construction, architectural, automotive and general industrial use. Possible applications include construction, architectural, industrial, heavy-duty trucks, busses, passenger cards, railcars, appliance, sheet metal panels, elevator cabs and plumbing fixtures.
It is a one component, water-borne, spray able coating designed to reduce structure-borne vibrations and associated sound transmissions. The coating is useful wherever a reduction in airborne noise is desired and reduced surface flammability is needed.
Remove excess dust, dirt and debris from the substrates to be bonded with a clean dry cloth or air stream.

Apply coating onto substrate and air dry at room temperature. Material will be dry to touch within 90 minutes. Dry hard within 24 hours and be fully cured with 72 hours.
Use water to assist in cleaning up wet coating. A mixture of isopropyl alcohol and water should be used to remove semi-dried material and soaking in aromatic solvents (e.g. mineral spirits, toluene) should be used to assist the removal of dried material.

Noise & Thermal Insulation Coating Zonta Insulative Coating
Water based viscous elastic compound manufactured specifically to dampen unwanted noises and vibration. Due to its viscous elastic flexibility it converts sound producing resonance into low-grade heat instead of noise. In addition to sound damping this product contains offer additional features such as fire-retardant, rust protection and more.
The most advance and reliable sound damping compound available moreover trusted by the automotive, marine, industrial, housing industry.

Zonta Insulative Coating is engineered to absorb resonant energy and reduce the transmission of airborne noise in passenger vehicles. Zonta Insulative Coating can be used as an interior coating, or as an exterior undercoating to reduce road, engine and exhaust noise as well as provide a seamless barrier against moisture, helping to prevent rust.
Recommended Installation Location

Zonta Insulative Coating should be used as an exterior undercoating and inside the car as an interior coating. Zonta Insulative Coating will only adhere to metal and should not be applied to plastic or upholstery.

Exterior

Floor pan - Entire floor pan including the wheel wells and lower half of the firewall or on trucks, the lower half of the rear wall between the cab and the bed.

Interior

Floor pan - Entire floor including the trunk floor and under the rear seat
Doors Inside skin and outer skin of the door
Trunk - Floor, quarter panels, rear deck, lid and wheel wells
Ceiling On the sheet metal and bracing
Firewall Entire firewall
Hood entire hood

The product can be applied with various spraying equipment.

About the Author:
I am Saurabh Kothari, Founder and CEO of Sansui Paints, Mumbai, India. Sansui Paints is one of Indias leading companies in the field of specialty and niche coatings and paints which offers Temporary Protection Coating, Wood & Furniture Coating, Plastic & Metal Coating, Zonta Insulative Coating.



Article Originally Published On: http://www.articlesnatch.com


Tags: , ,

|

Loading...
Related....
Videos...

Recent Small Business Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.