Ideas To Set In Great Stencil Shapes On Aggregate And Granite Blocks

Ideas To Set In Great Stencil Shapes On Aggregate And Granite Blocks

By:


Whenever anyone has to erect a monument, or use some material which is akin to granite but much more durable, the way to do this kind of procedure is with a sandblast stencil. This template is made of rubber since it is sandblast resist material, and the force of the material being blown onto the granite or other medium wears away anything that does not lie beneath the rubber template. This is particularly useful for those areas where the letters should stand out from the lower surface. In other words, the background is ground away to leave the lettering on the surface of the block. But this can also be carried out in the opposite way.

We have all seen by now those monuments or signs where writing seems to be cut out. This is done by the same technique where the rubber template is made in the shape of the letters and then the shapes are blasted with some kind of grinding medium. Once this is finished, the letters can be filled with gold leaf or some other such medium to make the finished effect look rather wonderful.

This system has been used in literally hundreds of different looks. Granite is perhaps a popular choice of medium to do this kind of work because it is good to look at and perfectly flat. These days, builders and masons do tend to go for concrete with a lot of aggregate mixed in to form a similar finish for those places where granite could prove to be too expensive. Using the blasting techniques can give a highly polished surface and looks very similar to granite if certain materials are added in. These companies who provide the templates and the services outlined usually have some other heavy duty treatments which they can provide. For example, vinyl coating for fences, or for the sides of houses, which water and weatherproofs the entire house very easily. These are usually put on with high powered spray guns to make sure the paint does not run. Then the coats are built up one by one to give a great seal. But these coatings can also be put on with a normal paint brush or roller which is a bit more labor intensive.

Even fences can have this kind of work done on them and since the coating can be guaranteed for up to thirty years, it is well worth the initial outlay. The fences or house will surely be protected for an inordinate amount of time without it having to be repeated.

These companies also provide load slitting where materials that are produced in bulk are then cut to whatever size the customer wants. This is particularly useful for items like wrappings or tapes which are easier to make in bulk before the slitting process is undertaken by a third party. Once the slitting is done, the materials are then repackaged to retail size packets which are sent on to the wholesalers.It is clear then that there is a great need for these industrial companies who can produce the right results for those who need them.

About the Author:
Connor R. Sullivan recently worked with a sandblast resist firm as he sought quotes for an abatement project. He had his company sign etched with a sandblast stencil on a large piece of granite. Check here for free reprint licence: Ideas To Set In Great Stencil Shapes On Aggregate And Granite Blocks.



Article Originally Published On: http://www.articlesnatch.com


Tags:

|

Loading...
Related....
Videos...

Recent Sales Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.