Author Login | Popular Articles | RSS Feeds | Sitemap

Home | Uncategorized


How to Create a Wraparound Deck

By: Richard Vande Sompel

Outdoor deck spaces that are designed to wrap around a house offer many benefits with fewer costs and construction headaches. Turning a corner or two is one of the easiest ways to create separate spaces on a deck. A wraparound deck allows a homeowner to get into or out of the sun or wind. It has the ability to create a private refuge separated from the main area of the deck where one can read or relax in private. The deck can also be accessed from more than one doorway.

A modest wraparound deck could be designed to include a full sized deck on one side of the house and a smaller addition on an adjacent side. Decks that are more ambitious would surround 2 or even 3 sides of the home. A narrow deck area can function as a passageway or walkway. On property that slopes, wraparound decks make travelling around the perimeter of the house much simpler.

When designing a wraparound deck it is important to decide upon the decking pattern before the commencement of framing. There are several decking pattern options. Decking run in 2 sections perpendicular to each other offers straightforward visual interest and is generally the simplest to construct. Decking the turns a corner may be more attractive but it is more difficult to frame.

Laying the decking can also turn out to be a challenge as well, especially if the decking is to be mitered. Decking that runs in the same direction creates the feeling that the deck is unified as a whole. The framing is slightly unconventional with joists running parallel to the house on one side and perpendicular to it on the other side. The construction is comparable in complexity to a basic deck.

Perpendicular decking on a wraparound deck is similar to 2 decks set next to each other. The ledger for one section continues beyond the home out to a post and the parallel beam extends the same distance. At the point where the 2 sections meet an adequate nailing surface is required for all decking pieces. It is wise to avoid the situation where it is necessary to drive a screw or nail closer than 1 inch from the end of a decking board. Other than that, framing requirements such as the size and spacing of posts, beams and joists can be calculated separately for each deck section. This method will work extremely well when a section is to be added to an existing deck.

Turning the corner with decking gives a deck a more handcrafted and professional look. However, it needs to be planned carefully because the point where the decking makes the turn is potentially a problem spot. Decking that is mitered is hard to install since it is difficult to keep every joint perfectly aligned. If a decking spacer board is installed initially along the miter angle, joints will not have to be perfect. A herringbone pattern is the simplest to install and creates a look that is very distinctive.

It is vital that all decking pieces are supported adequately at each end. Double joists with spacer blocks fixed between are solutions to this problem. One solution involves adding a 2x4 to each joist rather than doubling joists to increase the surface for nailing. Many of the joists will require cutting at a 45 degree bevel as well as the use of joist hangers.

An additional option is to run the decking on both sides of the house in the same direction. This method requires a major adjustment in the supporting framework. Install the usual ledgers on both sides of the home. One one side install a beam that runs the length of the deck. On the other side of the house install shorter beams running parallel with the first beam. Attach these beams to the house with a second ledger. It is important to remember that beams must sit below the ledger. However, it may be easier to install footings and posts near the house. Lap the joists over the short beams.

Plan ahead for how it will be best to install the decking so the joints between boards do not create an irregular pattern at the corner section. Generally, it is wise to start with a piece that runs along the house for part of its length.

The wraparound deck is a great choice design wise because it allows the homeowner to create an outdoor living space that can serve a wide variety of uses for family members and guests while making an aesthetically pleasing design statement.

Article Source: http://www.articlesnatch.com

About the Author:
Richard Vande Sompel is a professional deck builder of 35 years and over 850 decks built and is the author of "How to Plan, Design and Build a Deck from Start to Finish". To Discover More About Wraparound Decks and Claim your 2 FREE Deck Plans, Insider Report, MP3 Audio and discover everything to know about building a deck visit: http://www.DeckBuildingRevealed.com

| Print | Ezine Ready | |

Please Rate this Article

Recent UnCategorized Articles

  • How To Assemble A Model Tank By: Victor Epand - No matter where you have gotten it from, be it a holiday gift or an impulse buy, a model tank can be extremely fun to assemble.
  • How To Display Your Model Tanks By: Victor Epand - If you are looking for a way to pass your time and learn an interesting hobby as well then collecting model tanks may just be for you.
  • Limited Liability Corporation: Do One And Save Your Wealth! By: Ramapati Singhania - When the name of a company ends with L.L.C/LLC, it is a legal form of business which is incorporated as a company and offers restricted liability to its members.
  • Four Great Reasons To Collect Model Tanks By: Victor Epand - With so many different reasons to collect model tanks it is really hard to narrow the field down. There are, however, four very good reasons that it does make such a great hobby and should be given thought.
  • How To Weather Your Model Tank By: Victor Epand - If you have just assembled several model tanks and you have been looking for a way to work them into a great looking diorama then you might want to try weathering your tanks.
  • Model Tanks: Finding Your Skill Level By: Victor Epand - With so many different types of model tanks available today sometimes it can be difficult deciding which one is for you. One of the largest deciding factors should be the skill level that you feel comfortable with.
  • Why Should You Detail Your Model Tanks? By: Victor Epand - Assembling model tanks can be both fun and informative. There can be a good deal more to it that just buying it and throwing it together. Most models come in one flat color.
    Tags: model tank, detail, color
  • Why French Doors Are So Attractive By: Anna Stenning - Most people when beginning home improvement projects opt for extensions, a new conservatory, loft conversion, new bathroom or a newly fitted kitchen. Often these come along with a lot of stress, time, money and patience.
    Tags: french doors
  • Best Dating Tips For Men By: rodrigo rehn - It solely depends on your attitude and preferences what kind of a date you are looking forward to. Some people give a lot of importance to the looks of their partner and some pay more attention to the way she thinks.
    Tags: date, dating, attitude, personal
  • How To Build Foreign Model Tanks By: Victor Epand - If you have ever been on the Internet and found a great model tank that you would love to have but it was from another country feel free to order it anyway.
    Tags: model tank, foreign company, language

Today's Hot Articles

Search Ebay

Still can't find what you are looking for? Search for it!


Submit Your link to the Open Link Directory Project

Copyright 2005-2008 MJE Sales, LLC. All Rights Reserved.
Proud member of the ArticleCkr Search Network Search Network!
ArticleSnatch.com is free for both publishers and authors to use and is supported entirely from advertising revenue.
Use of our service is protected by our Privacy Policy and Terms of Service.