RAM of a system has always been associated with performance. There are a lot of us who think slow computer performance needs a replacement however the better choice is a memory upgrade. Thus in here we will look at the most cost effective and easy ways of boosting the performance of the system.
Assessment and compatibility of RAM
Mounting of RAM on the motherboard
Confirm the installation of RAM
Things to Remember while an upgrade
Assessment and compatibility of RAM
Every system is shipped along distinct configuration and components, the configuration of the system vary from one system to another. Therefore the first step towards installing a RAM is to check whether the RAM will be able to get along the system and perform smoothly or not. It has been observed that if the configurations are not coordinated, the devices fail to communicate. Manufactures manual has a detailed description of the components. Read through the compatibility of the RAM and also if required visit the brands website to check on what all RAM will go along the system. Make sure that the specifications if RAM is in sync. Bring in a desirable RAM to fix on the motherboard.
Mounting of RAM on the motherboard
Mounting of RAM on the motherboard seeks for utmost attention. Mounting of RAM must start off with turning of the system completely and taking off the live wires. For safety reasons, it is always suggested to take off all the cables and peripherals. Take off the chassis top to have access of the inside. Follow professional grounding to prevent any kind of damage. It is essential to have an uninterrupted access to the RAM slot. Make sure that you take off the RAM without touching the Pins and chips. Depending on the fact whether you posses a SIMM or a DIMM the installation will see a difference. The SIMM will be at a thirty degree mount whereas DIMM will be perpendicular to the slot. Fit in the holes with holders and connect them firmly, lock the sockets. After confirming a firm mount of the RAM, it is time to put on all the components back into the chassis. Close the chassis and turn on the computer.
Confirm the installation of RAM
After the physical installation of the RAM, one must confirm the systems acceptance and configuration to observe the change in specification. In order to do that, click on start, right click on my computer and click on properties. Confirm the capacity of RAM and make sure that it reflects the new change.
Things to Remember while an upgrade
Not every consumer has a new range of desktop; therefore it is a must to read through the manuals of older computers to adjust DIP or jumper settings. Static electricity is another aspect that needs to be taken care off with great attention. If the system is covered under the manufacturers warranty, installing a new component would void the warranty. If you are planning to make changes to the configuration of your system, computer repair and
technical support could offer you expertise assistance.
