How To Build An Awning?

An awning can be a great addition to an outdoor space within close proximity of any home. It can be very attractive and can add a beautifying touch to any house, but, most importantly, it is a productive way to get shade on very hot summer days. Buying an awning will cost you a substantial sum of money, therefore it may be a wise choice to attempt doing this yourself. It is not an extremely hard task to do and may be even quicker if you receive the help of someone willing and capable. If you already know how to operate a standard sewing machine then you will find it even less challenging to accomplish this task.

Required Tools

Sewing machine with a large needle

Electric drill

Measuring tape

Pliers

Required Materials

2 key rings

2 support poles

2 screw hooks

4 grommets

4 stakes

4 sections of rope

Large piece of canvas

Instructions

For the initial part of the process you will need to decide on the actual location where you would like to place your awning. When you have completed that you can then measure the area and think about how big you will be making your awning in reference to the style you would like to use. You should not be precise with the measurements when purchasing your material because you will need to allow additional space for your hem.

Once you have obtained your material you will have to sew a hem around it using your sewing machine to enhance its durability by stoppingthe threading at the edge from unwinding. The prefered type of thread to utilize is one made from nylon which is more resilient in outdoor conditions. Once you have carefully hemmed the entire section of canvas you will then be able to install a grommet on the individual corners of your awning.

You will have to get your measuring tape again and take a measurement of the awning from the grommet to grommet. You will have to use these measurements to determine where you should drill your two pilot holes. Mark the area on your wall or wood siding and drill the holes that show the specific area where the awning will be affixed to your house.

You will now need to screw the hooks in the pilot holes but be sure that the holes have been effectively drilled to make this possible or at least less difficult to accomplish. You may use your hands to do this in addition utilise a pair of pliers to fasten it more firmly.

For the part of your awning that will be directly attached to your home you may have to install a key ring on the individual grommet. You can then hook one of the key rings to the hook and then do this once more for the other hook. This may be easier if you are getting some help from another person who will can put up the other ring while you are doing your side.

You will have to stretch the awning so you can figure out where to place the support poles. The poles may be put in the ground or on a flat base that you have made for it to stand on. You will then need to run the top of the pole directly through the grommet of the awning.

Take a section of rope and tie it to two of your grommets that now have the poles running through them. You will then have to stake one portion of rope away from each awning pole and then get the other section of rope and place it adjacent to the initially installed stake. This will mean that the poles will maintain lines that are reinforcing it to the sides and front. This is another point where some help will be useful.

Tips

Once you are looking for fabric be certain to think about the colours currently on your house. It would possibly be best to get a colour that will blend easily with any colour you may choose to paint your house in future.

When using your drill be sure you are not close to any open water sources like puddles.