How To Build A Pole Barn?

How To Build A Pole Barn?

By:


A Pole Barn is a wood framed structure that is built with poles to sustain the walls of the structure and the roof. The name pole barn was originally used to refer to structures erected for agricultural purposes such as accommodating livestock or stowing hay and other feed. Pole barns can be used for a variety of purposes other than agricultural. Possessing one means having extra space to exploit. They can also be used as a garage for recreational or off-road vehicles or storage area for tools and other garden equipment. There are many ways that pole barns can be built. It all depends on what you prefer and what function the pole barn will serve.
Pole barns are very straightforward to build and need little knowledge and experience. Actually, there are kits accessible today to make the job a lot easier. So if you need a pole barn but do not want to bear the bother of building one, then this is the most appropriate option for you. These kits contain everything from simple screws to roofing materials to build a pole barn from the ground up. Some can be constructed by using metal and wood or using only one of the two. They may have simple dirt floor or concrete floor based on the users choices. The benefits of a pole barn are that it can be built fast and it is inexpensive to construct.
In order to erect a pole barn it is imperative that you choose an area that is suitable for the structure. That is, one that is flat and has proper drainage so that water is not stored.
Here are the directions to construct a pole barn:
Required Materials:
Pre-mixed concrete (sufficient to fill four post holes)
Four poles
Roof trusses
Tin roofing sections
Rope
Roofing nails
2 x 4 lumber
Roofing screws
Required Tools
Post hole digger
Hammer
Drill with accessory to screw in screws
Instructions:
1.Use the post hole digger to dig four holes spacing them carefully based the size of the preferred shed. Holes should be dug at least 16 inches deep.
2.Place a pole in every hole and fill with the concrete for added sustenance. Fix the poles to make sure that they are straight and strong.
3.Attach the 2 x 4 lumber to the tops of the poles and fasten them securely. They must be well secured so as to support the weight of the roof and the trusses.
4.Set up the roof trusses. Fasten the first truss by using the rope to tie it in position.
5.Nail 2 x 4 lumber onto the outward edge of those that were attached to the tops of the poles. This will help in holding the weight of the trusses.
6.Using the drill and roofing screws, screw the tin roofing sections to the roof. Intersect sections of the tin sheeting so that additional resistance against climate conditions is guaranteed. And that is how you build a pole barn!
Tips:
If the ground is wet, widen and deepen the holes to ensure they are kept in place.
It is a good suggestion to use 8-foot sections if you choose to purchase industrial lumber. This is because the 8-foot lengths are more exonomical to use.
Ensure that the tin roofing sections are corrugated.
Some persons choose to use walls around their barns. If you want to add walls, you can use ply board to do so.

About the Author:
Please visit these links for more information on : How to Build a Pole Barn and How to Build a Pole Barn.



Article Originally Published On: http://www.articlesnatch.com


Tags: , , ,

|

Loading...
Related....
Videos...

Recent Home-Improvement Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.