How To Build A Halfpipe?

Before constructing your halfpipe you should figure out the full dimensions at the onset stage, that is, the length and width of the structure. A larger ramp would be more ideal for skaters who prefer a bit of challenge and/or who are very experienced. Building a halfpipe is not excruciatingly difficult, but will take a bit of carpentry know-how.

Required Materials

1/4 Plywood
3/4 Plywood

Required Tools

Jigsaw
Nail
Wood Glue
Wood Screws
Roller
Paint Tray
Carriage Bolts

Instructions

1.Begin by constructing a life-sized template of the quarterpipe. You will have to utilize this as a guide while constructing your halfpipe. Essentially you will be using this to make sure that all your end supports are identical in size. You may use 1/4 plywood to make your template.

2.Attach the pieces that you have formed using duct tape or if you feel like being a little bit more exact, use a bit of 3/4 ply to make scab plates that you then can attach together with normal wood screws.

3.Cut your ply in half along the vertical path, you will be getting more out of the wood by doing this.

4.Cut off a section of about 2 feet from one of your pieces of ply and join/scab it to the large piece that has been left uncut. By doing this you should now have a 2ft by 10ft rectangular base.

5.Then you will need to build a 5 foot square that you will then jin to your rectangular structure, it will look like a very large boot when you are done.

6.Mark out your radius utilizing your nail as a pivot. The radius should go from the top corner to the lower corner that falls just beneath the nail.

7.Utilizing a jigsaw cut out the radius for your template.

8.Now you can use your quarterpipe to create your end panels. Building your end panels by using two layers of 3/4 inch plywood. You will need to laminate the two together to make certain that it remains stable while in use. This can easily be done by using wood glue to join them together. Place some wood glue in a paint tray and get a roller and put a thin layer of one glue on the surface to be laminated. Place the top layer over this layer and ensure that the edges are flushed. Allow this to set overnight. When it has dried you may use your template to build the end panels. Cut these out using a jigsaw.

9.Again you will use your template, this time to create intermediate supports. Make scab plates from 3/4 ply joined together, make sure that the scab plates are no less than two inches away from the edges.

10.Cut a few 2 by 4s into about 3feet by 9 inches in length. Ensure they are cut equally.

11.These 2 by 4s can then be laid on your structure to create the flooring. Nail these in properly with a hammer and a few wood nails.

12.The most important part of the process is creating your support frame. This will allow the halfpipe to support your weight. You may choose to create additional support by anchoring your structure to a building. When you have figured the type of framing you will utilize, anchor this to the almost complete structure utilizing carriage bolts.

13.Then construct your riding surface using 3/8 inch cdx ply for greater flexibility. Run the layers in the same direction making sure that the end joints are set up unevenly for additional strength. Screw these layers unto your flooring once you have set them up correctly.

Tips and Warnings

You can actually get your ground more level by shimming beneath the framing. However, if you are doing this make sure it is done properly as this can result in a unstable overall structure.

Your halfpipe should not shaky, if this happens you may need to anchor it with a bit of concrete. You may do this by placing your quarter pipes into the ground for extra stability.

About the Author:
Please visit these links for more information on How To Build A Halfpipe and this link for information on Build A Halfpipe

Article Originally Published On: http://www.articlesnatch.com

Tags: Build A Halfpipe

, DIY

, X games

, skate game boards

Related....

Videos...

Recent UnCategorized Articles

Color In Chinese Culture "...� By: fashionchinese | May 31st 2012 - Color in Chinese culture refers to the various colors that are considered auspicious or inauspicious. The Chinese character for color is (yns). In ancient China, the character more accurately meant color in the face. During the Tang Dynasty, yns ...

learn chinese online

Galvanized Steel Sheets & Pipes: Necessities Of Life By: R. Peterson | May 31st 2012 - Galvanized Steel obtained after the process of some chemical coatings over steel to protect it from rust and other unusual weather threats like corroding. Yes, it is the coating of Zinc Oxide around the steel which makes it better to use and protects from uno ...

steel products

galvanized sheets

galvanized pipes

A New Weatherproof Coal Bunker By: James P Martin | May 31st 2012 - Storage is often one of the most pressing issues on the minds of homeowners.

Ergonomic Computer Chairs To Prevent Spinal Injuries By: Kelly Fox | May 31st 2012 - Ergonomics is the study of how a person sits, stand, position itself, and move around at the same time as performs his daily assignments. It is significant to get information on how to put into force ergonomics while you work, move around, or sit down on a ch ...

How To Determine What Is A Good Website To Learn The Basics Of Forex Trading By: Mary Robins | May 31st 2012 - Foreign exchange is a platform for currency trading. A good website will explain why currencies are traded and how profits are made from these trades. It will also explain the value of currency and what determines one values currency to another. This is not a ...

forex trading strategies

forex trading strategy

forex trading software

forex trading systems

forex trading tips

Choosing The Right Ergonomic Office Chair By: Kelly Fox | May 31st 2012 - Amongst the most significant piece of furniture a home office can boast off is the ergonomic office chair. There is a wide range of office chairs to opt from, reliant on the function for which they are to be used. There are several office chairs just to sit o ...

How To Eliminate Pests By: James P Martin | May 31st 2012 - If you have a pest problem at your home, you may not know how to effectively eliminate pests. However, eradicating pests from your home and yard does not need to be difficult; you just have to know how to control the problem.

Newest Fashion Statement In Home Furniture By: Kelly Fox | May 31st 2012 - You see as soon as it comes to furnishing home with items like coffee tables, lesser is better is the latest trend, as the latest approach in the world of home furnishing is being modest as soon as it comes to home furniture. That denotes you need to confirm ...

Guidelines On Choosing The Right Office Chairs For Your Office By: Kelly Fox | May 31st 2012 - A significant thing to keep in mind earlier than buying a new set of office chair is that, it must be within your desired budget, next it should be from a reputed furniture retailer whether operating from neighboring store or online and thirdly, it should go ...

Buying A Right Ergonomic Office Chair By: Kelly Fox | May 31st 2012 - Furthermore in all probability if any single piece of office furniture that has experienced the most alteration in due course, it simply has to be the ever-present office chairs. With the advent of computers and electronic systems into our work profiles, for ...

Comments

Still can't find what you are looking for? Search for it!

Site Navigation: