How To Add A Shelf To An End Table

How To Add A Shelf To An End Table

By:


The end of the table a wonderful piece of furniture; useful units and light, it sits next to a sofa or favorite chair until you have your drink, and a remote control or book remains always at your fingertips. But you can make your end of the table more useful by adding the shelf. You can add a shelf gives you a little extra storage room for magazines or knick-knacks, and they can add a dimension of aesthetic interest to the piece of furniture.
Tools and materials:

* A piece of wood
* Drill and bits
* Two wooden arches.
* Screwdriver and screws
* Sandpaper
* Saw
* Measuring tape
* Wood stain or paint
* Wood glue
* Wood plugs

Step 1 - Choose your wood

The first search for a piece of wood that would match the end of your table. If you want the shelf to match, the search for a piece of wood with grain pattern similar; later you can use a wood stain or paint to match the color of the shelf to the table closely. You can buy a piece of wood from the hardware store or recycling pieces that you may have in the house.
Step 2 - Size and wood to contain

With your tape measure, measure both the breadth and depth of the end of the table you are working on. Takes note of the measurements. You'll want your rack to be the depth of the same table, but slightly narrower than the spacing between the legs of the table.

Use these measurements, taking the opinion of the private and trim a piece of wood you have chosen to match those dimensions. With your sandpaper, smooth away any rough edges or splinters.
Step 3 - Paint the shelf

After trimming the shelf to the size, you can stain, varnish or paint, according to your needs. Keep in mind that you may not be able to repeat the exact color of the table.
Step 4 - Install wood brackets

Now that your shelf is the right size and color, and take your wood brackets and two put on 2.1 inches away from the edges of the cliff. Make sure they are straight and equidistant, mark their location with a sign.

And then choose how high up on the legs of the table you want to install your rack. The use of drill holes on pre-drilling in the legs; lightly coat the holes with wood glue for extra stability. Line brackets in place and press it in the table legs.
Step 5 - Add the shelf to the end of the table

Finally, before drilling in the Algarve where the brackets will be installed. Place on the shelf a little arc. If a piece of heavy wood, you may need an extra pair of hands for this part of the task. Then tightly screw on the shelf brackets. To fill any gap in the wood and glue with wood plugs. Before you use the table, and let it sit for 24 hours. Want to make sure that any wood glue dries.

About the Author:
http://www.prohometips.com/ carries free home improvement advice, home repair, extreme home makeover, home improvement site, DIY, do-it-yourself, buying guides, consumer reports ,Free home improvement advice, great remodeling tips, and appliance buying guides by leading home improvement authority and DIY expert.
For further detail about visit our website: http://www.prohometips.com/



Article Originally Published On: http://www.articlesnatch.com


Tags: ,

|

Loading...
Related....
Videos...

Recent Home-Improvement Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.