Hammer Crusher---a New Type Of Hongxing Crusher

The hammer crusher also named hammer mill. It is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite, limestone, terrazzo, silica sand stone, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks, cement, alumen, brick, tile, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc. It is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess. And hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The PC hammer mill was developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. This crusher machine can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to change grain size of the discharge.

Henan Hongxing is a high-tech enterprise, which specializes in researching and producing wear resistant materials and crushing engineering products. With a complete line of crushing, grinding and screening equipments, we are confident we can provide you the most professional service for what you need.

There are many different types of hammer crushers, which can be classified as follows:

According to the number of rotors, it can be classified into single-rotor and dual-rotor hammer crushers.

According to the turning direction of the rotor, it can be classified into reversible and irreversible hammer crushers.

According to the arrangement of hammer heads, it can be classified into single-row and multi-row hammer crushers. Hammer heads of the single-row type are installed on the same revolution surface, while hammer heads of the multi-row type hammer are distributed on several revolution surfaces.

According to the connection type of hammer heads, it can be classified into movable and fixed hammer crushers.

Hammer Mill (Hammer Crusher) Working principle:

Hammer mill mainly crushes materials by the impact action. The electric motor drives the rotor for high speed revolving in the crushing cavity. Materials go into the machine body from the material mouth upside, and are crushed because of the attacking and the impact force of the high speed moving hammers. Under the rotor, there is a lamina cribrosa, the smashed materials which are smaller than the size of mesh grade can discharge through the lamina cribrosa, while large-sized materials will be brought back to the crushing area by the hammers of the hammer crusher to be recrushed until they reached the required size, and can be discharged from the lamina cribrosa.

hammer crusher: http://www.hxjqchina.com/product-list_20.html

Stone production line: http://www.hxjqchina.com/n26.html
Flotation cell: http://www.hxjq-crusher.com/34.html