Guidelines For Window Film Installation

Guidelines For Window Film Installation

By:


Window film acts a protective sheath against all the possible ill-effects on glass surface. Window film is helpful in blocking the harmful UV rays that are emitted by the sun. Direct sunbeams can fade away the colors of your drapes, curtains and furniture sets. You definitely would not want anything like that to happen to your interiors. Consider installing window film to save your indoor possessions from the ill-effects of sunlight to play on them. At any cost, the air leakage rating of your house should be below 0.3 cubic feet/minute.

Low E window films are pretty popular these days. They are capable of preventing heat loss through windows during winter season and heat gain during winter season. Solar window tints are especially designed to block the entry of solar rays up to 93%. Frosted window film helps in providing full privacy by allowing light to get diffused before penetrating through the glass. Decorative film is the one that serves all the basic purposes of a window sheath and also adds a decorative element to your room. Decorative tints are usually available in different patterns and colors to suit your interior dcor.

Prior to window film installation, you must clean the window with water and a cleaning agent. Use a sprayer to make the cleaning process easier for you. Remove all the dirt and grease from the glass surface. Focus more on the edges and corners. If you leave out any trace of dirt on the glass surface, the window film installation process may not be accomplished smoothly.

The different steps involved in window film installation are as follows:

* Measure the various dimensions of a window accurately. Take a note of the measurements by taking 1 inch extra on all the sides.

* Cut the film on a dust-free, clean surface.

* Divide the protective liner from the sheath.

* Spray the adhesive side of the film.

* Apply the film on the glass surface and even it with your hands.

* Spray on the film and press it from the center towards the edges.

* Clean up extra traces of water from the surface after the application of the film.

* Trim the extra edges of the sheath with the help of a sharp utility knife. Makes sure the edges are rightly aligned.


About the Author:
It is best to call for professional help at the time of window film installation. Only an experienced window film technician would know how to do it the right way.



Article Originally Published On: http://www.articlesnatch.com


|

Loading...
Related....
Videos...

Recent Home-Improvement Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.