Whenever it comes to the word 'barb', what comes in my mind with first impression is the line that defines border of two nations. Normally barb is referred for the 'spikes' but when it comes to household uses, 'barb' becomes an important word, as barb fitting is considered very important in fittings of sewage system.
Also known as Barbed fitting, this is done to connect two pipes together. Normally, two types of barbed fitting is done, which are respectively, Dubl fitting and Hose fitting. Both these fitting are diffrent from each other in nature. In this article, we have tried to figure the technical differences between the two. Read on to know, which fitting is going to suit your requirement the best.
Q. What is Dubl Barb Fitting?
A. Dubl fitting is considered compact than other type of fitting. It is also taken as a reusable fitting method which makes it economical to use. You can use it with polythene tubing as well. The major advantage of going for dubl fitting. It is also considered an smoother fitting version.
Advantages of Dubl Fitting Dubl fitting is a straight fitting that allows the hose to relax behind the barb using the clamp, which works like a drawstring. It helps the hose diameter in becoming smaller than the flare of barb.
Q. How to assemble Dubl Fitting?
A. To assemble a dubl
Barb Fittings, you simply need to push the tube over two barbs. But before you do it, make sure tube is squarely cut.
Q. What is Hose fitting?
A. Hose barb fitting is also known as brass fitting, as all the materials used in this fitting are made of brass. It is attached using straight and metric threads. Normally, beaded and standard barbs are used. Hose clamps keep brass barbs connected. However, hose fitting is bit costlier than normal dubl fitting but its re-usability makes it a good as well as economical choice.
Advantages Hose fitting are considered of great choice if you require extended elbows and tees to attached with the tube.
Assembly of hose fitting It is normally assembled using clamps. Hose needs to be cut neatly and then lubricated. Now slide the clamp on the hose. Push the hose to the fitting until it stops hexing.
For a long lasting and successful sewage system, it becomes very important to pay attention on sewage system fitting. Sewage system with good barb fitting would not require a second look for years.
