Food Grade Grease For Food Service And Pharmaceutical Industry

Food Grade Grease For Food Service And Pharmaceutical Industry

By:


Food grade grease fall under the category of lubricants that go a long way to enhance the performance of machines in food service and pharmaceutical industry. Since both these sectors deal with the manufacture of sensitive products like food, beverage and medicine, utmost care should be taken to make sure that food should not contaminated due to use of these greases. Unlike normal industrial greases and lubricants, this group of fluids smoothen the functioning of machines and the same time protect the sanctity of the products, even when they come into accidental contact with each other.

Yes, with this grease type, you do not have to compromise on the quality of your end products. Also, it saves you substantial costs, as otherwise contamination level to a certain percentage may require you to discard the entre consignment of food or medicine. Many critics of this grease used in food industry say that they cannot perform as good as the normal grease, but this is not so. Manufacturers have today come out with options that offer the best of both worlds.

So, what can you expect from a good quality food grade grease?

Better low- and high-temperature performance.
Extra-pressure, and anti-wear additives.
Inhibit corrosion and oxidation.
Operating temperature ranging from -40 C to 149 C (-40 F to 300 F).

Selecting your Grease/Lubricant

Before going ahead in ordering food grade grease for your need, it is necessary that you consider certain factors. Make sure that the grease/lubricant formulation is in compliance with CFR, Title 21, Section 178.3570 and meets the requirements for an NSF H1 (formerly USDA H1) lubricant where there is possibility of incidental food contact. Another important factor to take a note of is, make sure that you use the proper grade and type of food grade lubricant as recommended by original equipment manufacturer. Failure to do so may lead to short bearing life and/or a risk of other unwarranted accidents.

Applying the Grease

Food grade grease are being used extensively in many food processing and beverage units as they are water resistance, provide lasting lubrication and protect extensively against corrosion. The food grade lubricant is usually applied by automatic lubrication systems fitted to many types of food processing equipment. You can also apply them manually or by using a standard grease gun or via a central lubricating system.

Using quality products is the key, just like you would take care to use the right air compressor oil for your compressing equipment.


About the Author:
H & B Industries supply petroleum based and synthetic air compressor oil that suit the requirements of various compressor types. We make operating equipment a breeze even in the extreme conditions. And also supplies food grade lubricant, food grade grease to ensure ultimate safety.



Article Originally Published On: http://www.articlesnatch.com


|

Loading...
Related....
Videos...

Recent Business Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.