The
512 channel controller pertains to the
DMX512 channel controller that lets you to control up to 512 channels per universe that contains a maximum of 32 fixtures. Now, every single channel is assigned a specific value, which range from 0 to 255. The
DMX512 channel controller produces control signals and transmits them via cable to the different lighting fixtures, dimmer packs and special effects.
There exist several good reasons why you better use a DMX512 channel controller to squeeze the maximum of the lighting and special effects. One of the good reasons could possibly be that you have organized for the band’s gig and you feel that the lighting needs to be spruced up for the event. You may not need to shell out enormous sums of cash on this. Or you may simply need to add interesting lighting effects in the bar to add some life to it. Whatever be the reason, applying the DMX512 channel controller could enable you to control various lighting fixtures and special effects on the laptop computer or on the PC.
Using a DMX512 channel controller it is easy to control any number of fixtures, special effects or dimmer packs that are responsive to the DMX protocol. Of course, the DMX512 channel controller should not be utilized for concrete configurations and you must adhere to the local guidelines. It is also commonly not allowed to be utilized for pyrotechnics, truss movement equipment, movable stage units. In fact, a 512 channel controller should not be utilized for anything that can lead to hazard to people’s and animal’s life.
In a 512 channel controller, every single universe could have up tol 512 channels where every single channel is assigned a value from 0 to 255. The values for all the channels are routinely transmitted by the 512 channel controller via the cable. This means that each and every fixture must have an address or address range that is responsive to the controller. For each and every fixture that you use, you will want to assign independent addresses by way of the DIP knobs that are there at the end of every single fixture. It is easy to also get it done via an inbuilt menu on a LCD display.
Once every single fixture is assigned appropriately it will start answering to the info available on its assigned channel and will disregard the other channels. Lastly, if there is much more number of fixtures then you may want to use much more controllers that have 512 channel capabilities.
