Examining Volts When Purchasing Electronic Cigarettes

All electronic cigarettes consist of the same basic components. There is a reservoir for the vaporizing liquid, an atomizer that turns it into vapor and a power source. The power source could be a batter that is part of the device or it could be connect by a wire to a USB port or a car charger. The voltage range that is used is between 3.5 and 6V and it can make a big difference to the quality of vapor you get.

When making your first purchase it is usually easiest to get a kit with everything you need in it. The components are all sold separately and if you really know what you are doing you can match different lava tube ecig and batteries for best performance. Make sure that the battery and charger are always matched though.

The way that electronic cigarettes work is that liquid is drawn into the atomizer where it is heated to produce vapor. The heating element is a resistive coil that heats up when a current passes through it. It is important that this current is not left on permanently as it could burn it out or melt other parts next to it.

There will be batteries that are specifically for manual or automatic models. There could be a variety of different batteries that you could use with the same model though. It is fairly important to match the voltage to what the atomizer is designed for because it will obviously work best in this range. There is a bit of leeway though and you don't always need and exact match.

If there is more power then there will be more heat. If there is more heat then the e liquid could vaporize more effectively. It is also possible that you could overheat the liquid too and atomizers that are made for a higher voltage don't necessarily burn hotter.

What is marked on the product however is not always what is delivered. Depending in the make you might only get 3V when it is marked at 3.5V. In this case just changing the make could deliver better performance, which is more in line with what is required. In other instances it could be useful to use something a slightly more powerful.

If you feel that the vapor you are getting is a little weak then the power source might be the problem, even if it is the one specified for the make you are using. If you want to experiment it is possible to get a battery that has adjustable voltage. If you are unsure then forums for electronic cigarettes are a good place to get advice on what might actually work.

It might not always be the power source that is the problem. Try cleaning the atty first to see if there is an improvement. If are using the correct voltage for your electronic cigarette it might burn better and even clean itself out if it is clogged.