Eight Basic Steps To Creating Inexpensive Bunk Beds For Young Children

Eight Basic Steps To Creating Inexpensive Bunk Beds For Young Children

By:


Most dads and moms want to have their children rest on bunkbeds to save on space. These are the steps you may follow to make cheap kids bunk beds:

Get the materials and equipment ready

You need 4 posts which measure 8x8x12 inches, 4 beams which measure 2x4x38 inches, 4 beams which measure 2x4x75 inches, plyboard sheets that measure 1/2x38x75 inches, 2 dowels having 1x75 inch measurements, sixteen three-inch wood screws, 16 10-inch bolts having washers and also nuts, twenty five 1-inch wood screws, sandpaper, a drill having auger, screwdriver as well as regular bits, a circular saw and a longer, slim nail.

Start creating the bed mattress structure

Use two pieces from every beam type which you have, 8 of the 3-inch wood screws, 12 of the 1-inch wood screws, a plyboard sheet and the nail and drill. The particular drill bit you use needs to be small compared to the three-inch wood screw's diameter. Start drilling into the two edges of 1 the 75-inch beams and be sure to drill through the face. There needs to be a distance of approximately one inch between the slots and the end of the beam.

Affix the thirty eight-inch beam into the seventy-five-inch beam

Set the 38-inch to the 75-inch beams in order that they make an "L" shape. Square them off so that their surfaces could line up. Drive a nail to the screw holes you prepared in the 75-inch beam till it marks the 38-inch beam. Drill 2 additional slots into the thirty eight-inch beam's tip. Repeat the drilling activity for the opposite tip of the seventy five-inch beam. Drive the wood screws into the holes you drilled to attach the 38-inch beam to the seventy five-inch beam. Repeat the drilling process for the second 75-inch beam.

Drill two slots into the edges of the 75-inch beams

Utilize a drill bit that's a bit bigger than the bolt's size and begin drilling 2 holes at the end of the 75-inch beams. The holes must be one-half inch from the inner side of the thirty eight-inch beam and when lined horizontally it must be one-half inch from one another and from the edge.

Affix the plywood sheet

You can put plyboard sheet on the framework you have formed. You can now connect it to the frame with the one-inch wood screws. Utilize 1 screw for every side, 2 for the longer parts and one for the shorter sides.

Drill holes into the eight by eight inch posts

Begin constructing the support frames by drilling slots into each of the 8x8 inch posts. Use a drill bit which is a bit bigger compared to the bolt's dimension. The slots should've a distance of 2 inches from the side of the wood and also one ft . from the side of the post. Drill additional hole which is perpendicular to the other drill holes. It must have a diameter of one 1/4 inch and should be six inches apart from the post's end. The actual auger bit should be applied for this part. Continue this phase for the other 3 posts.

Start assembling the bunkbed

Set the framework of the bed using the lower group of slots on the posts. Affix the framework and also the posts together by using 8 washers and bolts. Continue this stage for the structure of the upper bunk.

Put the mattress and dowels

The particular dowels can be utilised as security rails for the bed, hence slide these to the biggest slots. Once the dowels are fastened tightly, you can now put the mattress.

You have now successfully built a bunk bed for your kids.

About the Author:
Written by Jacob Schiffer. If you're looking for ready-made cheap kids bunk beds, make sure you pay a visit to http://www.bunkbedsnow.com/cheap-kids-bunk-beds.html.



Article Originally Published On: http://www.articlesnatch.com


Tags: , ,

|

Loading...
Related....
Videos...

Recent UnCategorized Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.