No doubt that evidently the
TOYOTA Navigation System organism can transport you a lot of convenience when trek to different place. With that, you will never be lost, even when major in unfamiliar territory. It is very costly to invest these systems, but liability it yourself can help you innocent money, while you feel comfortable with wiring and stereo installations. Here you can learn how to add gps navigation.
Step 1
Go to your home car accessories supply or car dvd nav online store and buy a gps navigation organism compatible with your year accord.
Step 2
Unscrew the screws on the, both sides of your axis console coat. And then remove the crux console cross from the car.
Step 3
Pull out the old radio and disconnect the wires in the back.
Step 4
You require to mount the CPU to a sound place under the dash by with Velcro tape to twig the entity to the base of the dash. Some kits may have a CPU mount that you can screw into place. Then you should mount the tentacle to the turn of the console under the windshield. There is an adhesive strip on the underside. You must to use it to spear onto the curve of the dash as close to where the windshield meets the dash as you can. Step 5
Run the wires provided from the CPU to the receiver and the navigation item. And then block the rope yoke into the back of navigation component.
Step 6
Slide the
TOYOTA RAV4 Navigation into the dash. You should be careful. Dont disconnect any the wires.
Step 7
After screwing the seat console instance back into place, you can encode the
In Dash Car DVD Player logic. You can do that by the abuser handbook instruction.
