Drawer Runners - Ultimate Know How

By:


Do-it-yourself projects are easier to conceive than they are to actually carry out. There are so many minuscule aspects of building and upkeep that tend to go unnoted. Whilst DIY renovating kitchens, bathrooms and even bedrooms, the compact storage system of drawers are sure to pop up. Being aware of the immense selection of individual drawer runners and how to fit them provides a huge advantage when fixing your home.

If you don't already know, drawer runners are the metal strips that hold a drawer and enable it to glide in and out. They should provide a fluid motion, free of noise or shakiness, and should stop when they attain their most open or closed state. These runners can be categorised in many assorted ways depending on material, design, and installment.

Runners can be constructed from wood, plastic or metal. They're attached to two edges of the floor of the drawer. While metal assemblies are flush with the housing, this is not so with wood runners. Wooden runners instead tend to project somewhat to fit into their comparable grooves in the locker, either side of the drawer.

Drawer slides are a kind of slide in which a channel is mounted within the drawer's housing while a bracket and roller are mounted upon the actual sides of the drawers. With this type of mechanism, you can anticipate a smooth action and in many cases, self-closing. Another type of mechanism is the ball-bearing drawer slide, comprising of 2 separate parts. The separate pieces slot together, to hold the drawer open or closed. Depending on yours or your builder's preference, you can choose short of full extension variations.

There are many types of applications for these runners. Where you want to be able to easily reach all the way to the rear of the drawer, full-extension runners are the ideal choice. Full-extension runners with a concealed soft closing are similar, yet they close more gently. Another type is touch-release, which are also full-extension but have a push-latch technology to hold the drawer closed when it is shut. It just requires a soft push when in the closed position to release the latch and open the drawer.

There are merely a few steps to installing runners on drawers. You must first use screws to attach the runners to the sides of the drawers, so they are at equal heights, running parallel to one another. Then, the drawer must be held in the cavity of its housing to ensure that the sliders can fully close, marking where screws need to be placed. Tools can then be used to drive in the screws. Last but not least, remove the drawer and loosen the runners with your screwdriver. This done, you can make your final checks, making sure everything is aligned before tightening the screws.

Drawer runners help add to the atmosphere of any home. Badly fitted or poor quality drawers and runners can really spoil that quality look and feel. The key is to ensure that you select the right slides and runners for the job. Then, it is all about the know-how of installation. If you know what you're doing and select the correct drawers and runners, you'll relish superior results.

About the Author:
I'm convinced you'll agree with me when you head over to Eurofit Direct that they have the best selection of drawer runners and drawer slides on the web.



Article Originally Published On: http://www.articlesnatch.com


Tags: , ,

|

Loading...
Related....
Videos...

Recent Home-and-Family Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.