Digital Camera Battery Maintenance Skills

For a (section) digital camera battery for the duration of use, not just its quality, power on, in fact, the use of operations with the user also has great relevance. Most photographers are used after every use of the camera on the camera bag inside, or on the cupboard, took out the battery is not kept separately, this approach sounds fine, but not conducive to battery protection.
If more than 15 days do not usually use the camera, it is best to remove the battery from the camera inside the store alone, save the environment, it is best to dry and cool place, and do not store the battery together with metal objects.
According to our survey, you can buy in the market most digital cameras use lithium batteries, it is relatively easy to store. The only caveat is that if not used for long, preferably at intervals of 2 months to activate a battery, which is the charge and discharge time, this can effectively extend battery life.
If you go out, the temporary use of alkaline batteries, we must remember that time out, or when unused for long periods, the battery is easy to Tangshui corrosion circuit, the camera could not escape the destiny scrapped.
For users of alkaline batteries, already mentioned above, remember the point is finished using the digital camera, remove the battery must remember to avoid the phenomenon of cell sap and damage the machine.
Lithium battery charging time is generally longer than 8 hours, while the Ni-MH battery charging time is generally more than 16 hours. To achieve best results, that is, the battery has reached its maximum capacity, generally more than 3 times repeated charge-discharge can. Battery with three times, the best opportunity to find a completely exhausted battery to charge again, try not to charge the battery when there are remnants of repeated charge, or will shorten battery life. After the battery charge is generally more heat, it is best to be cool and then into the camera battery.
In addition, in order to avoid the loss of electricity, the use of nickel-metal hydride battery user, charging is completed, remove the battery, do not let the battery contact with the conductor while the positive and negative poles, for example, do not use your fingers touch both ends of the battery. The use of lithium users should try to keep the camera inside the battery positive and negative battery contacts clean, if necessary, wipe with a dry cloth and then gently wipe the battery.
1, to avoid frequent use of flash: If you are not professional photographers, then, except in the invisible fingers of the night, the light intensity of an ordinary day for the average digital camera, it is enough.
2, Do not let the screen has been lit: If the case of small power, can turn off the LCD screen, use the viewfinder to adjust the picture composition, is for a digital camera, LCD should be considered the most power-hungry components, general digital camera, LCD screen after closing time can be used when the original length of about 3 times.
3, should not frequently open, shut down: Many users know that the display stays lit is power, so in order to save electricity use to frequent opening and shutdown. In fact, frequently open, shut down the electricity wasted consumption than bright display even more, especially for larger diameter lenses, but also requires a substantial expansion of the camera, the switch is power. Most digital cameras have automatic shutdown option, this setting should not be set too short, otherwise easily lead to frequent opening and shut down. Of course, frequent artificial opening, shut down and should be avoided.
4, optical image stabilization not normally open: Optical image stabilization is by driving the lens or image sensor components, offset by the subject matter images and the relative motion between the sensors achieved. Either way the optical image stabilization, would result in no small power consumption, in particular some models can be anti-shake mode is set to "always on" so that power loss will be caused by the more powerful. To this end, we have a good scene in the light should turn off the optical image stabilization feature, you must use, should also be less "always on" mode.