Most breakdowns having to do with Ceiling Fans could very well be accredited to the installation, and in most cases are very easily repaired. Below is a basic outline of the more frequent blunders.
Sounds
Motor size is the main element to quality. As time passes, it is typical for smaller motors to create sounds that are unrepairable. Discussed below are some useful noteworthy information that might just help find out if that is the situation.
Switches
The use of a rheostat or dimmer control on the fan will cause just about any ceiling fan to hum. Ceiling Fan motors should be run with a toggle switch that will not differ the voltage. SW95 or SW90 are switches that will function with a good number of manufacturers.
Assembly
Anything that isn't tightened adequately will likely result in making louder any noises the ceiling fan possibly will make. Make certain that all bolts and the light fixtures are tight.
Wobbling
It truly is considered normal to have a little bit of motions in any kind of Ceiling Fan running at top speeds. Blade balancing bundles that come with the majority of ceiling fans, could certainly eliminate or reduce this type of motions. The following are a few recommendations You will be able to use if your ceiling fan wobbles way too much.
The quickest test is for poor mounting; Give the bottom of the fan a small push with your fingers. On stem mounted fans the fan should return to center and stop. If the fan keeps moving, follow these steps for excessive motion.
Mount: The mounting box in the ceiling needs to be metal, and solidly mounted to a joist or brace kit. The mounting bracket from the fan must be tightly fitted to the electric mounting box.
Down rod or Stem: On ceiling fan with a down rod or stem be certain that the groove on the ball at the top of the rod is aligned with the notch on the mounting bracket. There are generally a few screws to secure at the ball and where the stem come together into the top of the ceiling fan.
Blades: The Blades are matched sets, and their weight is within just a oz of each other. Loose blades are often a cause of wobble. Always be sure all screws holding the the blades to the irons, and the the blade assembly are secured properly. To find out you have a twisted ceiling fan blade: Use a ruler to measure from the tip of the ceiling fan blade to the ceiling. Let the blades pass by the ruler and observe if one or more fan blade is higher than the rest. There may very well be a minor difference in height that will not cause any wobble issues.
The preceding is a typical summary of the more common things missed, or done wrong when installing a Ceiling Fan. If you have more specific questions about the operation of any ceiling fan. Please contact us 952-898-2754 or 1-866-600-FANS(3267). Visit our main website
Fan Man Lighting.
Fan Man Lighting /
Internet Marketing by SEO Web Designs
