Crusher type
How to do the debugging of the composite crusher? Must first ensure that the chaos, the voltage balance of the equipment, the
electrical properties of normal operation, the feeding should gradually increase, knowing full load until, pay attention to
the particle size
Feeding scale than the designated value. Anomalies should be promptly shut down for investigation as debugging device
debugging, troubleshooting inherited in the debugging process pay attention to the axis of rotation Cheng Youliang
Good lubrication status of bearing clearance to the right size, and bearing temperature rise does not exceed 75 C. Normal
composite crusher commissioning work can be put into normal use.
Composite crusher installation work is completed in order to empty load test, the empty load test the device to start the
operation for some time, but do not add material to the crusher internal, empty load trial
Dry Ball Mill
Demand continuous operation of about 2-4h to be qualified, generally empty load test completed composite crusher
commissioning work. Boot shutdown sequence of the composite crusher to be accurate, to boot first start
Motor, then the crusher downtime successfully boot successfully just the opposite. Composite crusher produced in the process
of body vibration phenomenon occurs, therefore composite crusher used fixtures
Body fixed in the horizontal and sturdy pouring the concrete foundation; pay attention when installing the body perpendicular
Chancadora de quijada
to the ground; double-check that all bolts are loosening, if so loose in a timely manner to carry tight
Firm, to avoid link site produced in the process of shedding lead to breakage; will observe the door closed; fair configure
Impact Crusher
the power cables and the power control switch, look for motor power requirements power supply connected
Line to be accurate; whether the installation is complete, hand pulled the impeller of the impeller inspection equipment and
flexible operation, the intensity of the motor and the crusher belt tensioner to the right. How to do the installation of the
composite crusher
Work? Composite crusher attention to equipment installation surface should be kept clean inside the machine will not fall
into foreign body.author-anyne361
Raymond Mill http://www.chinazhongke.net/Grinding-mill/20.html
Single Stage Hammer Crusher http://www.china-xingbang.com/35.html
European Type Jaw Crusher http://www.chinazhongke.net/Crusher-Series/43.html
