Building A Deck One Screw At A Time

Deck screws are bolts designed to accommodate the challenges of wood decks' many slim planks. This is why they can withstand the harsh environmental conditions. The deck screws are usually more corrosion resistant than regular screws. Some of the common characteristics of prime guard deck screws are that they can easily be driven and they place smoothly aligned with deck surfaces, this attribute is called countersinking. So these types of screws are commonly self countersinking, corrosive resistant and are self drilling. Some of them are even custom made so that they are tamper proof for greater finish and security.

Like other screws, deck screws come in an extensive range of lengths as well as widths which are called shanks. And for this very reason, different shaped drivers are used on their head to dig into the surface of the wood and eventually rotate it. The most common head shape is square though there are of course other shapes and sizes. A distinguishing characteristic of deck screws are their sharp tips which makes them easier to install. These tips are very sharp and narrow pointed designed to lessen the need for drilling some pilot holes. Wood decks after all are normally soft in nature so this feature greatly helps them to be fastened or to be secured without the need for pre drilled holes- this is called self tapping.

Another distinguishing feature of deck screws is their self propelling quality made possible by their one of a kind shank design. Shallower degrees of course needs more thread on their lengths as the thread of these screws are still calculated in degrees. The screws are easier to put in because these threads tend to spread out the force, but it is still relatively difficult to pull it or take it out. You can lubricate deck screws if you want to, to make them slide more easily into the wood.

Undeniably, the most important and vital feature of deck screws are their natural resistance to corrosion or decay. It is made possible by the type of metal used on them and the metal coating which resists rust. Some of the most common examples of these types of deck screws are zinc plated, galvanized, high copper, stainless steel as well as ceramic coated. These screws are very appropriate for exterior use on fences or decks as they won't stain the timber. Composite decks made from specially developed materials have become very popular recently. To cater to these decks, special types of deck screws had been designed. Regular screws of this kind will only cause the plank to pull up or away in a hump making it look like a mushroom.

To avoid these types of issues, use manufacturer recommended decks crews. You can use power drills or grabits on correctly sized square drivers for these. A good tip on determining your needed deck screw size is by tightening the screw down so that there still is about an inch of thread left down in the receiving board. This way, you are at least ensured of a hard connection. Consulting a contractor when planning to build a deck is a good idea so as not to experience any trouble!