Black And Decker Hammer Drill

Black and Decker 6.5 Amp half inch hammer drills are meant to be pierced! Take anything, from steel and wooden blocks to concrete; this hammer drill is no cause for the buyer's disappointment. It can be just an ideal hammer drill that you dream to possess. Avail yourself with this hammer drill in order to do all sorts of jobs on a domestic level that involve rotary drilling and hammering.

To serve utility for drilling on to a variety of jobs, it comes with two selectors for speed which require manual settings. By taking in constant power from the electric supply grid, the low speed mode provides enough high torque to start penetrating on any flat surface which needs drilling. High torque is required initially to set grip of the drill bit into the drilled substrate which is being pierced. The high speed mode on the other hand is exclusively meant for drilling fast and getting the job done within a matter of seconds.

Work on hard rock in masonry jobs? Not a problem at all! 51 thousand beats in a minute; such is the capability of this miraculous product. This hammer drill is fully equipped with a revering brush system that makes it capable of delivering full power. Full power can be obtained in both forward as well as backward directions. Full power means that the drill is very much efficient in terms of electricity conversion into mechanical energy. The durability of this hammer drill is very much improved due to the fact that it is housed with metal gearing system. All this is backed up by a massive two year warranty straight from Black and Decker manufacturer itself.

Power is the keyword for this hammer drill. It allows you to operate on a variety of objects for jobs to be done. It can be put to use for applications like installing a wooden/steel shelf, operating on masonry walls, wooden stud jobs, electrical utility box drilling, etc. This product is known to let free its raw power to pierce steel and concrete to a record half inch straight without any problems and wood to an extent of an inch. High quality of products used for the construction of this drill show their importance. Provision of an added set of controls is made by a side handle that can move about itself by 360 degrees of freedom and an additional depth rod. Balance and comfort for this powerful machine is achieved through the classy mid handle design as well as the soft feel grip.

The specifications of this machine are hilarious. The hammer drill contains a built in motor that consumes a whopping 6.5 Ampere of current so that it can have no means of stopping while it drills effortlessly through metal, wood and plastic. This comes with a chuck key and holder to support this hammer drill while you are busy at any job. The manual speed tuning offers versatility in 2 speed gearing mechanism for speeds up to 3000 rpm. The lower speed setting provides high torque and lesser speed of up to 1000 rpm with a delivery of a very high torque.