At&t 2wire 2700hg-b Basic Dsl Wi-fi Gateway Install

If you are studying this doc, you most likely are on the lookout for on how to set up your new At&t 2wire dsl router. Throughout this document I will probably be using a 2wire 2700HG-B wireless router, but this tutorial may also apply to other routers that 2wire offers At&t with. The very first thing to do when organising your 2wire dsl router is plug the dsl filters into all your cellphone jacks, the place you propose having a telephone. On one of many dsl filters, you should see a dual filter that reads Cellphone and DSL/HPNA, on the side that says DSL/HPNA plug a phone line into this port, then run the other end of the cellphone line into the telephone port on the again of the 2wire dsl router.

After you have linked the cellphone line, plug a ethernet cable into port 1 of the router, then connect the opposite end of the ethernet cable into your pc. Upon getting made the connections between your computer and the dsl modem, and the modem and the dsl filter. You can then plug in the energy adapter into the router, then plug the power adapter into the wall outlet.

Once the 2wire dsl router powers up, you must see a green light subsequent to energy, ethernet, and dsl. Once you see these lights turn inexperienced in your 2wire router, the following that it's worthwhile to do is open an internet browser reminiscent of Web Explorer. After you open your net browser, you should see a home windows that resembles the one below. Once you see this window, press the next button, which ought to then ask you to obtain the 2wire dsl setup tool.exe.

Once you have installed the 2wire dsl setup software, the 2wire gateway authentication display screen ought to open, simply select the sure button.After you might have authenticated your 2wire router, you need to set an administrative password for your router. I recommend setting a password with higher and decrease case, with a few numbers for safety reasons. This password will come in handy if you're attempting to change settings in your 2wire router. To entry the router in the future to alter any settings, merely type 192.168.1.254 into your net browser.

Next you've gotten set a password on your router, click on the subsequent button to begin registering your 2wire modem with At&t.After you could have registered your router, read through the settlement then click I Agree button. After you've gotten accepted the agreement with At&t sbc yahoo dsl, you will need to create a person name and password to your dsl account. To start setting up your new person title and password enter you land line telephone number that you've received from At&t.

After you will have created your new username and password, there will probably be one other progress display, then click the end button. After you've accomplished the about steps, shut down your current browser and reboot your computer, this will resolve any community problems. After you laptop reboots open you web browser and being surfing the web with your at&t 2wire dsl router.

In case you are excited about port forwarding on your 2wire router, open an internet browser and type in 192.168.1.254 into the URL address bar. Upon getting clicked the submit button and window resembling the one below should appear. The password that you simply created earlier for you 2wire router, will be the one you employ right here when altering setting in your 2wire dsl router.