A Guide To Removing The Steering Box So Gearbox Repairs Can Be Made

A Guide To Removing The Steering Box So Gearbox Repairs Can Be Made

By:


Modern vehicles are equipped with power assisted steering modules that tend to wear out over time. Because of this gearbox repairs are required and this can be done using specialized tools and some knowledge. The steps required to replace the internal parts can be found online and installed in a home garage if a person has the necessary equipment.

Jobs of this type are generally performed by shops that specialize in repairing components of this type. In some cases people who work on their own cars perform the work themselves and this is usually done by individuals with mechanical backgrounds. When this is the case the parts are ordered ahead of time and are available for purchase online and from local parts stores.

Tools are very important when tackling a job of this magnitude and need to be collected before the process can begin. Some of the required tools include a floor jack, jack stands, a drip pan, rags, an air powered gun with half inch connections and a set of half inch sockets. Also some specialty items which are required include a pitman arm remover, spanner wrench and snap ring pliers.

Specialty tools such as a spanner wrench, snap ring pliers and a pitman arm remover will be needed to remove the components. Always practice safety when performing an operation of this type as it will ensure the job goes smoothly and prevent any accidents from happening. To do this the job should be done in a garage or on a concrete surface to provide an even surface for the jack and stands.

After lifting up the vehicle, the job can begin by removing the drag link and pitman arm assemblies. In order to do this, the cotter pin that connects them must be removed first and then the nut holding the pitman arm on the shaft is removed. To do this the removal tool is used by inserting it in between the arm and the drag link, then using a hammer tap the tool to separate the two.

Once the arm and link have been separated, the tension bolt needs to be removed from the rag joint assembly. Finally the hydraulic hoses need to be removed and this is where the wrenches are used, open ended models are the best ones for this part of the job. Practice extreme care when removing the hoses so they are not damaged during the removal process.

The last part of the removal process includes the retaining bolts which hold the unit in place. There are a total of three bolts all together and are removed using the impact gun and the right sized socket. When pulling the unit out it is important to remember that it is quite heavy so taking care when lifting it is very important. After it has been repaired the installation process is done in complete reverse of the removal steps.

Gearbox repairs are something that is required on all types of vehicles that make use of a steering wheel. When a person wants to learn how to do the work themselves it is recommended that they purchase a used box from a junk yard. This will allow them to practice on the unit prior to doing the work on the real thing.

About the Author:
We know you need to learn some more with gearbox repairs now - we also want to tell you some more on gearbox problems.



Article Originally Published On: http://www.articlesnatch.com


Tags: , , , , , , ,

|

Loading...
Related....
Videos...

Recent Automobiles Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Site Navigation:

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.