7 Easy Guidelines To Craft Your Personal Oyster Card Holder

7 Easy Guidelines To Craft Your Personal Oyster Card Holder

By:


If you reside in the U.K., you know exactly what an Oyster card is. Oyster cards are typically prepaid charge cards which are utilized in London's Tube transport system. These prepaid cards usually include a plastic wallet meant for storage. But, if you wish to have a card holder which is more customized, you can consider creating your very own by using plastic wallet inserts or some other common items. Additionally, Oyster cards are about the exact same size like usual plastic cards hence you may use the Oyster card holder you create for other types of plastic cards as well.

Prepare the things that is required

This project is simple to do and utilizes resources that you can quickly acquire at home or purchase at hobby suppliers. You should have a few duct tape, some scissors, as well as some ornaments of your personal preference, including such things as peel-off stickers, beads, decorated duct tape as well as other adornments.

Cut the duct tape

Start by cutting sections of the duct tape. Be sure that the sections measure two inches larger than your Oyster card or other card that you are interested to use the card case for.

Stack the duct tape pieces that you cut with the sticky part facing up

Lay one piece of the duct tape you just cut in a horizontal fashion over a level work top. Make sure that the adhesive portion is facing right up. Stack some other portions of duct tape beginning at the middle of the first section. Just like the 1st one, make sure that all the portions have the sticky portion facing up. The horizontal sides should also be layered parallel to one another. Keep overlapping until eventually the overlapped piece is approximately 2 inches wider than your cards.

Pile yet another group of sections with the adhesive facing straight down

Do the same as the previous step. Overlap the duct tape but the sticky part must be facing downwards. Squeeze both of the overlapped portions together so you can close the shell of your cardholder. Fold the sides which are open and press so they will be closed as well.

Make a card pocket

Repeat the previous procedure to create a card pocket. Cut extra pieces of duct tape and be sure they measure 1 inch longer compared to your card. Continue overlapping and halt if the piled pieces are 1/2 the width of your card.

Attach the pocket

When you're done making the pocket, put it to either side of the card case shell using the tape. Tape three sections of the pocket and leave the 4th side, the one facing upwards, open so that you can utilize it as the entrance of the pocket.

Put whatever finishing add-ons you want

Slide in your Oyster card or another card into the pocket. Start adorning the surface of your card holder utilizing the decorations you prepared. Ensure that the adornments do not impede the usefulness of your creation.

Now you have your own personalized Oyster card holder that is unlike the generic ones used by everyone else.


About the Author:
Written by Patricia Strasser. If you're searching for plastic wallet inserts that you can utilize for
your metro or any plastic cards, go and visit
http://www.everydayplastics.com/WalletInserts.php



Article Originally Published On: http://www.articlesnatch.com


|

Loading...
Related....
Videos...

Recent News-and-Society Articles

Comments

Still can't find what you are looking for? Search for it!

Loading

Copyright 2005-2011 ArticleSnatch, LLC - All Rights Reserved.
Privacy Policy | Terms of Service.