From the battery can be seen on the status of the battery has not charged, the other to teach you a simple method to determine the battery has no ongoing charge when the battery will have a fever phenomenon, when the battery is full after one hour (power do not pull the plug), you go to try the battery to see if the
HP HSTNN-CB1U Battery still hot? The results must be cold, because the battery is not charging and discharging state certainly does not heat.
Notebook manufacturers are recommended at the factory for new battery 10 hours or more. This sentence may be some users have a false view of the first, the author's view is that this should be taken into account that some notebook manufacturers a new user in the new battery charge time and can not fully grasp the skills, simply charge them directly ten hours, so this should be the business of expediency.
d. less electrolyte; e. low conductivity electrolyte; f. positive and negative film is not equipped with good;
g. membrane porosity; h. adhesive material attached to the aging off; I. thick paper core (not dried or not the electrolyte infiltrate)
j. not fully charged when the sub-content; k. capacity is smaller than the anode material.
2. Resistance high. Reason:
a. negative film and the very ears Weld; b. the positive electrode and the very ears Weld; c. positive ear and blocks Weld;
d. negative ear and shell Weld; e. resistance of large rivets and plate exposure; f. cathode conductive agent is not added;
g. no lithium salt electrolyte; h. short-circuit the battery once; I. separator porosity.
3. Voltage is low. Reason:
a. Vice-reaction (decomposition of the electrolyte; cathode impurities; water); b. not into good (SEI film is not formed completely);
c. customer leakage circuit board (refer customers back to the batteries after processing); d. spot did not seek customers (customer processed batteries);
e. burr; f. micro-short circuit; g. generate negative dendrite.
4. Thick. Produce thick of the following reasons:
a. weld leakage; b. decomposition of the electrolyte; c. water without drying;
d. poor sealing cap; e. shell wall thick; f. shell thick;
g. thick core volume (with too much material; pole piece without compaction; membrane too thick.)
5. Causes the following points
a. is not into good (SEI film is not complete, compact); b. baking temperature is too high aging stripper adhesive; c. negative specific capacity is low;
d. positive and negative with materials with less material and more; e. cap leakage, seam leakage; f. decomposition of the electrolyte, the conductivity decreased.
For the laptop, the
HP TY06 Battery life consumers have become recognized as short a "common problem." Resulting in battery mode laptop short life, there are many, so early in the purchase and use, we should all understand from what and to avoid in advance it?
As we all know, even if you just give laptop computers to increase the brightness of the screen a bit, plus a memory expansion card, or plug a mouse or something, will shorten the laptop in battery mode of life, so it is realistic to say: laptop battery life issues will always become the helpless, because in a short time at least there will be no qualitative change, then we're helpless? could only watch five hours had only three life reduced to a two hours? The answer of course is no.
First of all, unless it is necessary, otherwise we try or not to use laptops in battery mode, it is best to use in the city environment, especially with prolonged use of laptop computers for people who work, do not hope laptop battery can give you a little convenient, even if your notebook's battery life of eight or nine hours or more.
Second, if you can, in the battery mode, it is best not to use too much or notebook computer peripheral functions, such as use of the environment, or if conditions allow, the best to the minimum brightness of the display, unplug the mouse using the touch pad, close the built-in network card or sound system, etc., in short, to achieve maximum battery life, must be "sacrifice", although this time using a laptop a little pain.
Is a commonplace that the final proposal to you to prepare one or two spare laptop batteries, which often use battery life for those people who work, is the most sensible and effective solution.
Notebook computer batteries in the existing context of technology products, to get longer battery life is still a dream, especially when the lithium-ion battery technology products still dominate, but did not improve the quality of life under the premise of notebook computers battery life on a wide range of "breaking ten (h)" The road is still far away.
Current friends, for most notebook computers, are still a high-end consumer goods, so each selected notebooks friends, hope they can get to their desirable products. But now the notebook market, but fully refurbished notebook computers are many times that we are referring to the refurbished notebook computers, is the notebook manufacturers or individuals will have been damaged or worn notebook recovery, and make the appropriate repairs and refurbishment, the then be sold into the market, because these notebooks are brand new in appearance and almost the same laptop, so it is easy to be some unscrupulous profiteers sold as a brand new laptop, so that marketing costs have suffered, and both of these refurbished laptops in quality, performance and service with the new laptop
HP 06TY Battery has a very different, and their serious damage to the interests of consumers, today we have to talk to you about how to identify refurbished laptops.
