If you own a farm or an estate, you need to ensure that you have the necessary equipment to keep the horse rugs and blankets clean and tidy. You can buy
horse rug washing machines from vendors who specialise in the sale of commercial laundry equipment. Pet blankets and horse rugs can turn out to be very difficult to clean especially during the winters. Many people are not quite clear about the kind of machines that they need for such heavy-duty washing. If you happen to fall in the same category, then the following points may certainly help you out to an extent.
It is obvious that when you have such heavy laundry to deal with, the size of the washing machine is certainly a point of consideration, if not the most important one. Pet blankets and horse rugs are available in different sizes and shapes. Commercial laundry equipments also vary in size and have a capacity ranging from 5kg to 50kg. In order to ensure that you purchase a machine of appropriate size, you can weigh the washables first. Generally, small animal bedding and other laundry for vets can be comfortably washed in a machine with a capacity of 7kg to 10kg. Horse rugs, on the other hand, would require a drum load size of 10kg to 23kg.
Before you buy the product, it is necessary that you have a 3-phase or 415 volts electric connection. However, this sort of a connection is only available for commercial establishments. They are comparatively much more expensive when it comes to their installation. Several laundry machines even operate by an inverter drive system. This helps the machine to be down rated. Thus, it is necessary to check the existing set up prior to the installation of commercial washing equipments such as
hospital washing machines .
It is also necessary to determine the position at which you would like to install the washing machine, if possible prior to buying it. The most suitable area for such an installation would be a concrete area that can store both the washing machine and the dryer. You need to check with the installation instructions first. Some of these machines can be installed on wooden floors as well. This also depends on the machine; whether they are high spin models or standard spin machines. Standard spin machines have to be bolted down to a minimum of 300mm in concrete foundations. On the other hand, soft mount and high-speed machines can be installed without any such support. It is necessary that a space of around 400mm be left at the rear of the machine for servicing.
The water connections also need to be in place. Having a supply of both hot and cold water would be ideal. The next important point of consideration is obviously the drainage system. The machines are usually equipped with a gravity drain and you should ensure that the gravity drain outlet is at a position higher than that of the main drain.
People are also confused about whether to go for start up brands or to invest in brands, which have established themselves. Obviously, industry experts would recommend going for the established brands, which have been around for quite some time.
